Creative Commons Attribution-ShareAlike 2.0 UK: England & Wales Thu, 17 May 2012 08:44:58 +0000 http://faq.ecat.com/ FAQ.ECAT.COM webmaster@faq.ecat.com webmaster@faq.ecat.com en-us In its response to Dr. Joseph Fine you write: ""we have stabilized it at very high temperatures"" But … then the dream to produce steam for the traction is approaching? http://faq.ecat.com/127558/in-its-response-to-dr-joseph-fine-you-write-we-have-stabilized-it-at-very-high-temperatures-but/ Sun, 06 May 2012 10:25:42 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127558/in-its-response-to-dr-joseph-fine-you-write-we-have-stabilized-it-at-very-high-temperatures-but/ With your new achievement is it possible to increase the COP? http://faq.ecat.com/127557/with-your-new-achievement-is-it-possible-to-increase-the-cop/ Sun, 06 May 2012 10:24:19 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127557/with-your-new-achievement-is-it-possible-to-increase-the-cop/ Will it be possible to run the household e-cat with a higher temperature, too, in order to produce electricity? http://faq.ecat.com/127556/will-it-be-possible-to-run-the-household-e-cat-with-a-higher-temperature-too-in-order-to-produce-electricity/ Sun, 06 May 2012 10:23:30 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127556/will-it-be-possible-to-run-the-household-e-cat-with-a-higher-temperature-too-in-order-to-produce-electricity/ 1. Is most of the heat in the E-Cat produced by the interaction of gamma photons with lead? 2. Are there other minor sources of heat? If so, can you specify? 3. Are neutrons created in the E-Cat? If so, does the lead block them from radiating, or are they too slow to even leave the reaction chamber and pose a threat to human safety? http://faq.ecat.com/127555/1-is-most-of-the-heat-in-the-e-cat-produced-by-the-interaction-of-gamma-photons-with-lead-2-are-there/ Sun, 06 May 2012 10:18:09 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127555/1-is-most-of-the-heat-in-the-e-cat-produced-by-the-interaction-of-gamma-photons-with-lead-2-are-there/ Notwithstanding the trade secret, given the nerve-wracking wait for gi worn my trust and that of your supporters, you publish this manual at least on line? http://faq.ecat.com/127554/notwithstanding-the-trade-secret-given-the-nerve-wracking-wait-for-gi-worn-my-trust-and-that-of-your/ Sun, 06 May 2012 10:16:47 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127554/notwithstanding-the-trade-secret-given-the-nerve-wracking-wait-for-gi-worn-my-trust-and-that-of-your/ Will it feature a "red button" type of a rapid emergency shutoff system? http://faq.ecat.com/127553/will-it-feature-a-red-button-type-of-a-rapid-emergency-shutoff-system/ Sun, 06 May 2012 10:13:37 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127553/will-it-feature-a-red-button-type-of-a-rapid-emergency-shutoff-system/ I'd like to build a standalone unit, (like a space heater) completly indipendent from the central unit. What type of optional/accessories (radiator, pump, etc) do you suggest to buy together the E-Cat i already ordered? Or may be you just considered a kit. Do you plan to increase the COP in the near future? http://faq.ecat.com/127552/id-like-to-build-a-standalone-unit-like-a-space-heater-completly-indipendent-from-the-central-unit/ Sun, 06 May 2012 10:12:38 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127552/id-like-to-build-a-standalone-unit-like-a-space-heater-completly-indipendent-from-the-central-unit/ What do you think of Athanor and Brillouin technology? From your experience, these different methods of creating energy can work? http://faq.ecat.com/127551/what-do-you-think-of-athanor-and-brillouin-technology/ Sun, 06 May 2012 10:11:20 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127551/what-do-you-think-of-athanor-and-brillouin-technology/ Does anyone know if helium formation has actually been observed in a Brillouin reactor (as suggested)? Or, for that matter, in an Ecat? http://faq.ecat.com/127550/does-anyone-know-if-helium-formation-has-actually-been-observed-in-a-brillouin-reactor-as-suggested/ Sun, 06 May 2012 10:09:52 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127550/does-anyone-know-if-helium-formation-has-actually-been-observed-in-a-brillouin-reactor-as-suggested/ Is Hydrogen used only or is Deuterium (Heavy Hydrogen)used? http://faq.ecat.com/127549/is-hydrogen-used-only-or-is-deuterium-heavy-hydrogenused/ Sun, 06 May 2012 10:01:34 +0000 Asked by Ecat.com 2 weeks ago http://faq.ecat.com/127549/is-hydrogen-used-only-or-is-deuterium-heavy-hydrogenused/ Some questions about a loss of electrical power at full power. 1 How long did it take for stopping? 2 Are residual calories evacuated by thermosyphon or is there any risk of core destruction? 3 Is automatic restart operating after electrical power return? http://faq.ecat.com/123274/some-questions-about-a-loss-of-electrical-power-at-full-power-1-how-long-did-it-take-for-stopping-2/ Fri, 20 Apr 2012 20:56:23 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123274/some-questions-about-a-loss-of-electrical-power-at-full-power-1-how-long-did-it-take-for-stopping-2/ Why would lead solidification be so unfortunate? I mean that lead can be melted quite easily, with a gas flame for example. http://faq.ecat.com/123271/why-would-lead-solidification-be-so-unfortunate/ Fri, 20 Apr 2012 20:55:10 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123271/why-would-lead-solidification-be-so-unfortunate/ Regarding electrical power generation: Would it be thinkable to run and sustain the LENR in the bulk of a molten alloy? For instance of Pb and Ni-Hydride? http://faq.ecat.com/123267/regarding-electrical-power-generation-would-it-be-thinkable-to-run-and-sustain-the-lenr-in-the-bulk/ Fri, 20 Apr 2012 20:53:52 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123267/regarding-electrical-power-generation-would-it-be-thinkable-to-run-and-sustain-the-lenr-in-the-bulk/ What will happen with the lead shield when the reactor overheats by accident? If there are no cooling water flowing and no control system working. The reaction will stop because the temperature goes high and the nickel starts to change composition. There have been mentioned temperatures up to 1500 degC. The lead melting temperature is about 330 degC. Is the lead shield existing during the above described conditions? Are there any danger for the gamma rays? http://faq.ecat.com/123261/what-will-happen-with-the-lead-shield-when-the-reactor-overheats-by-accident-if-there-are-no-cooling/ Fri, 20 Apr 2012 20:52:05 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123261/what-will-happen-with-the-lead-shield-when-the-reactor-overheats-by-accident-if-there-are-no-cooling/ I was wondering, will you have space next to your Thermal E-Cat Factories for your Electric Factories? http://faq.ecat.com/123260/i-was-wondering-will-you-have-space-next-to-your-thermal-e-cat-factories-for-your-electric-factories/ Fri, 20 Apr 2012 20:49:13 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123260/i-was-wondering-will-you-have-space-next-to-your-thermal-e-cat-factories-for-your-electric-factories/ Once certification is secured for the domestic E-Cats, how long do you estimate it will take before you are able to start manufacturing the units? http://faq.ecat.com/123258/once-certification-is-secured-for-the-domestic-e-cats-how-long-do-you-estimate-it-will-take-before-you/ Fri, 20 Apr 2012 20:47:36 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123258/once-certification-is-secured-for-the-domestic-e-cats-how-long-do-you-estimate-it-will-take-before-you/ Would be possible scoop the resources from DARPA? http://faq.ecat.com/123256/would-be-possible-scoop-the-resources-from-darpa/ Fri, 20 Apr 2012 20:46:18 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123256/would-be-possible-scoop-the-resources-from-darpa/ Have you tested and/or integrated different size subunits (energy ratings) and numbers of modules per stage in (multiple-stage) Series-Parallel E-Cats? (SePaCat?) If you use multiple stages, do you still need heating elements in the intermediate or final stages as well as in the primary low temperature stage? http://faq.ecat.com/123255/have-you-tested-andor-integrated-different-size-subunits-energy-ratings-and-numbers-of-modules-per/ Fri, 20 Apr 2012 20:44:51 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123255/have-you-tested-andor-integrated-different-size-subunits-energy-ratings-and-numbers-of-modules-per/ Is there a maximum temperature that can be achieved with an "optimum" number of cores connected in series before the energy delivered is very low (say 50 KW vs 1000 KW) or the system is unstable? Or are you already at the optimum? http://faq.ecat.com/123254/is-there-a-maximum-temperature-that-can-be-achieved-with-an-optimum-number-of-cores-connected-in-series/ Fri, 20 Apr 2012 20:42:14 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123254/is-there-a-maximum-temperature-that-can-be-achieved-with-an-optimum-number-of-cores-connected-in-series/ Any indication from UL as to certification of the home e-cat? Any dates you can commit to that invited parties will see a working plant – who can then report back via the Internet? Any pictures or video of a home e-cat working or connected to a home central heating system? Any pictures or video of the 1MW system that we have not seen? What about some pictures from earlier versions of the e-cat – perhaps early experiments from a few years ago? http://faq.ecat.com/123253/any-indication-from-ul-as-to-certification-of-the-home-e-cat-any-dates-you-can-commit-to-that-invited/ Fri, 20 Apr 2012 20:39:11 +0000 Asked by Ecat.com 4 weeks ago http://faq.ecat.com/123253/any-indication-from-ul-as-to-certification-of-the-home-e-cat-any-dates-you-can-commit-to-that-invited/ I was wondering, if you increased the hydrogen pressure to a very high level, and then initiated a rapid temperature increase greatly above the ignition temperature, do you think a military-type reaction would result, assuming the enclosure could contain the reaction for some period of time? http://faq.ecat.com/122427/i-was-wondering-if-you-increased-the-hydrogen-pressure-to-a-very-high-level-and-then-initiated-a-rapid/ Sun, 08 Apr 2012 15:21:16 +0000 Asked by Ecat.com 1 month ago http://faq.ecat.com/122427/i-was-wondering-if-you-increased-the-hydrogen-pressure-to-a-very-high-level-and-then-initiated-a-rapid/ Would an E-Cat be safe to leave outside to heat chicken coops or greenhouses? http://faq.ecat.com/122426/would-an-e-cat-be-safe-to-leave-outside-to-heat-chicken-coops-or-greenhouses/ Sun, 08 Apr 2012 15:19:00 +0000 Asked by Ecat.com 1 month ago http://faq.ecat.com/122426/would-an-e-cat-be-safe-to-leave-outside-to-heat-chicken-coops-or-greenhouses/ Why not give the problem to a young MBA and tell him to solve the regulatory/authorization problems? http://faq.ecat.com/122425/why-not-give-the-problem-to-a-young-mba-and-tell-him-to-solve-the-regulatoryauthorization-problems/ Sun, 08 Apr 2012 15:17:14 +0000 Asked by Ecat.com 1 month ago http://faq.ecat.com/122425/why-not-give-the-problem-to-a-young-mba-and-tell-him-to-solve-the-regulatoryauthorization-problems/ Does a phenomenon exist at COP>6 that does not exist at COP=6? http://faq.ecat.com/122424/does-a-phenomenon-exist-at-cop6-that-does-not-exist-at-cop6/ Sun, 08 Apr 2012 15:15:22 +0000 Asked by Ecat.com 1 month ago http://faq.ecat.com/122424/does-a-phenomenon-exist-at-cop6-that-does-not-exist-at-cop6/ Is nanopowder sized nickel required for the reaction or is it more economically and more readily available nickel powder that can be used? http://faq.ecat.com/122423/is-nanopowder-sized-nickel-required-for-the-reaction-or-is-it-more-economically-and-more-readily-available/ Sun, 08 Apr 2012 15:13:13 +0000 Asked by Ecat.com 1 month ago http://faq.ecat.com/122423/is-nanopowder-sized-nickel-required-for-the-reaction-or-is-it-more-economically-and-more-readily-available/ - have you built a mathematical model of your reactor above 260°C? - which control method are you using for your reactor? (PI/PID/MPC) - what is the length of the control horizon of an industrial ecat? (seconds/mins/hours) http://faq.ecat.com/122001/have-you-built-a-mathematical-model-of-your-reactor-above-260c-which-control-method-are-you-using/ Sun, 01 Apr 2012 16:03:38 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/122001/have-you-built-a-mathematical-model-of-your-reactor-above-260c-which-control-method-are-you-using/ Most nuclear reactors can be divided into two categories, BWR and PWR reactors. My thinking then is that the original E-Cat technology would be best fit to refurbish a BWR reactor and the "fat cat" technology could be used to modernize a PWR reactor. Without exposing any commercial secrets, could you tell us if this is a realistic prospect? http://faq.ecat.com/122000/most-nuclear-reactors-can-be-divided-into-two-categories-bwr-and-pwr-reactors-my-thinking-then-is-that/ Sun, 01 Apr 2012 16:02:12 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/122000/most-nuclear-reactors-can-be-divided-into-two-categories-bwr-and-pwr-reactors-my-thinking-then-is-that/ 1. Does the control unit maintain a COP of 6 for ANY value between 0 and 10 kilowatts of output power, especially in the low end of that range? 2. Theoretically, can a higher COP exist for very small values of output power WITHOUT creating new problems for stability? 3. Is the instability at higher temperatures due to a) the higher speeds of the reactants or b) the higher rate of transmutation? http://faq.ecat.com/121999/1-does-the-control-unit-maintain-a-cop-of-6-for-any-value-between-0-and-10-kilowatts-of-output-power/ Sun, 01 Apr 2012 15:59:49 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121999/1-does-the-control-unit-maintain-a-cop-of-6-for-any-value-between-0-and-10-kilowatts-of-output-power/ Which of the following entities does the control unit alter in a CYCLICAL manner? A) pressure b) temperature c) fields d) charge flow http://faq.ecat.com/121998/which-of-the-following-entities-does-the-control-unit-alter-in-a-cyclical-manner/ Sun, 01 Apr 2012 15:57:14 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121998/which-of-the-following-entities-does-the-control-unit-alter-in-a-cyclical-manner/ I ask myself, "Would I allow a heating system to be installed in my house, warming my family, if I was uncertain as to the power generation mechanism and safety". Certification from independent and government organizations help to ease one's concern. But herein is a possible nuclear fusion mechanism and the words "nuclear" strike fear in most hearts. I have asked others and their comments were, to the effect "How big will the crater be when it goes unstable?". http://faq.ecat.com/121997/i-ask-myself-would-i-allow-a-heating-system-to-be-installed-in-my-house-warming-my-family-if-i-was/ Sun, 01 Apr 2012 15:54:38 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121997/i-ask-myself-would-i-allow-a-heating-system-to-be-installed-in-my-house-warming-my-family-if-i-was/ With no electric (heating) input, how is control maintained? http://faq.ecat.com/121996/with-no-electric-heating-input-how-is-control-maintained/ Sun, 01 Apr 2012 15:50:54 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121996/with-no-electric-heating-input-how-is-control-maintained/ Is the e-cat unable to get to the required temperature or is it that if it does the reaction becomes too violent and unstable? http://faq.ecat.com/121995/is-the-e-cat-unable-to-get-to-the-required-temperature-or-is-it-that-if-it-does-the-reaction-becomes/ Sun, 01 Apr 2012 15:48:56 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121995/is-the-e-cat-unable-to-get-to-the-required-temperature-or-is-it-that-if-it-does-the-reaction-becomes/ Will the commercial e-cat also contain Boron, as described in you patent? Would it be possible exclude the use of Boron in the e-cat concept? http://faq.ecat.com/121828/will-the-commercial-e-cat-also-contain-boron-as-described-in-you-patent/ Wed, 28 Mar 2012 16:46:57 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121828/will-the-commercial-e-cat-also-contain-boron-as-described-in-you-patent/ Would simple convection flow to the elevated water tank be sufficient to properly cool the reactor or would a pump be required? http://faq.ecat.com/121827/would-simple-convection-flow-to-the-elevated-water-tank-be-sufficient-to-properly-cool-the-reactor-or/ Wed, 28 Mar 2012 16:43:55 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121827/would-simple-convection-flow-to-the-elevated-water-tank-be-sufficient-to-properly-cool-the-reactor-or/ Have you been able to mass produce your nickel+catalyst fuel in large quantities in a production manner? How long does your fuel production process take? Weeks? Months? http://faq.ecat.com/121826/have-you-been-able-to-mass-produce-your-nickelcatalyst-fuel-in-large-quantities-in-a-production-manner/ Wed, 28 Mar 2012 16:42:08 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121826/have-you-been-able-to-mass-produce-your-nickelcatalyst-fuel-in-large-quantities-in-a-production-manner/ Just curious to know if the pump is included in the unit, this will have some implication on the design for introduce the e-cat in the home heating system? http://faq.ecat.com/121825/just-curious-to-know-if-the-pump-is-included-in-the-unit-this-will-have-some-implication-on-the-design/ Wed, 28 Mar 2012 16:41:04 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121825/just-curious-to-know-if-the-pump-is-included-in-the-unit-this-will-have-some-implication-on-the-design/ Did you even observe generation of visual light in the core during operation? http://faq.ecat.com/121824/did-you-even-observe-generation-of-visual-light-in-the-core-during-operation/ Wed, 28 Mar 2012 16:39:30 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121824/did-you-even-observe-generation-of-visual-light-in-the-core-during-operation/ Can you tell us more about your concerns as a entrepreneur regarding the factory? http://faq.ecat.com/121822/can-you-tell-us-more-about-your-concerns-as-a-entrepreneur-regarding-the-factory/ Wed, 28 Mar 2012 16:37:24 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121822/can-you-tell-us-more-about-your-concerns-as-a-entrepreneur-regarding-the-factory/ Are you saying you've setup a production factory, able to manufacture MILLIONS of devices per year, without any information spillage? Have you excavated a deep bunker under a high mountain, and hidden your factory there, or drilled the Moon, or what? http://faq.ecat.com/121821/are-you-saying-youve-setup-a-production-factory-able-to-manufacture-millions-of-devices-per-year-without/ Wed, 28 Mar 2012 16:32:45 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121821/are-you-saying-youve-setup-a-production-factory-able-to-manufacture-millions-of-devices-per-year-without/ Is the hardware and software for controlling the reaction it implemented on a critical standard (CEI60780, EN50128) respecting the protection of persons? http://faq.ecat.com/121820/is-the-hardware-and-software-for-controlling-the-reaction-it-implemented-on-a-critical-standard-cei60780/ Wed, 28 Mar 2012 16:29:13 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121820/is-the-hardware-and-software-for-controlling-the-reaction-it-implemented-on-a-critical-standard-cei60780/ Did you try to measure a possible perturbation of gravity around the reactor of the e-cat? http://faq.ecat.com/121818/did-you-try-to-measure-a-possible-perturbation-of-gravity-around-the-reactor-of-the-e-cat/ Wed, 28 Mar 2012 16:26:17 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121818/did-you-try-to-measure-a-possible-perturbation-of-gravity-around-the-reactor-of-the-e-cat/ How you will solve the off-to-on requirements of a home heater? http://faq.ecat.com/121816/how-you-will-solve-the-off-to-on-requirements-of-a-home-heater/ Wed, 28 Mar 2012 16:22:19 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121816/how-you-will-solve-the-off-to-on-requirements-of-a-home-heater/ What would be the approximate cubic volume of a 45 MW reactor? http://faq.ecat.com/121407/what-would-be-the-approximate-cubic-volume-of-a-45-mw-reactor/ Mon, 19 Mar 2012 15:14:13 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121407/what-would-be-the-approximate-cubic-volume-of-a-45-mw-reactor/ Have you considered directly coupling the e-cat heat exchanger to a thermal storage tank (water heater)? http://faq.ecat.com/121406/have-you-considered-directly-coupling-the-e-cat-heat-exchanger-to-a-thermal-storage-tank-water-heater/ Mon, 19 Mar 2012 15:13:19 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121406/have-you-considered-directly-coupling-the-e-cat-heat-exchanger-to-a-thermal-storage-tank-water-heater/ Are Siemens, in any way financially involved in your venture or just subcontractors? Who is supplying the scientific know-how for your improvements to the E-CAT, do you have in-house researchers? http://faq.ecat.com/121404/are-siemens-in-any-way-financially-involved-in-your-venture-or-just-subcontractors/ Mon, 19 Mar 2012 15:11:46 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121404/are-siemens-in-any-way-financially-involved-in-your-venture-or-just-subcontractors/ You may want to allow others to add value by adding other capabilities to the e-cat, similar to Apple's strategy of producing iPhones and allowing others to create the applications. The more people that can create add-ons to your heat module, the more valuable it will become. http://faq.ecat.com/121403/you-may-want-to-allow-others-to-add-value-by-adding-other-capabilities-to-the-e-cat-similar-to-apples/ Mon, 19 Mar 2012 15:10:06 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121403/you-may-want-to-allow-others-to-add-value-by-adding-other-capabilities-to-the-e-cat-similar-to-apples/ What is still missing at the zero hour? I.e. How long still serves for the production of E-Cat from 10 kW? http://faq.ecat.com/121402/what-is-still-missing-at-the-zero-hour/ Mon, 19 Mar 2012 15:05:47 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121402/what-is-still-missing-at-the-zero-hour/ 1) everything is ready for production of the Home E-CAT? Or, 2) If not, what major issues have to be settled (certifications, manufacturing), and… 3) When will production start and orders begin to be filled. http://faq.ecat.com/121400/1-everything-is-ready-for-production-of-the-home-e-cat/ Mon, 19 Mar 2012 15:02:32 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/121400/1-everything-is-ready-for-production-of-the-home-e-cat/ Is it possible to exploit the existing boiler to send the water temperature in such a way as to depress the peak for the ignition of the E-Cat? http://faq.ecat.com/120862/is-it-possible-to-exploit-the-existing-boiler-to-send-the-water-temperature-in-such-a-way-as-to-depress/ Wed, 14 Mar 2012 15:02:51 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120862/is-it-possible-to-exploit-the-existing-boiler-to-send-the-water-temperature-in-such-a-way-as-to-depress/ Does it mean that the nickel powder (plus catalyst) is pre-heated to 1500 degrees by using an electrical heater element and that the heat exchange to the water flow is occurring only via the low energy gamma radiation using lead? http://faq.ecat.com/120861/does-it-mean-that-the-nickel-powder-plus-catalyst-is-pre-heated-to-1500-degrees-by-using-an-electrical/ Wed, 14 Mar 2012 15:01:04 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120861/does-it-mean-that-the-nickel-powder-plus-catalyst-is-pre-heated-to-1500-degrees-by-using-an-electrical/ Is the e-cat controller intelligent and 'aware' of other e-cats to prevent them starting up at the same time? http://faq.ecat.com/120860/is-the-e-cat-controller-intelligent-and-aware-of-other-e-cats-to-prevent-them-starting-up-at-the-same/ Wed, 14 Mar 2012 14:58:06 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120860/is-the-e-cat-controller-intelligent-and-aware-of-other-e-cats-to-prevent-them-starting-up-at-the-same/ How the 10kW E-Cat will be integrated into various heating systems? http://faq.ecat.com/120859/how-the-10kw-e-cat-will-be-integrated-into-various-heating-systems/ Wed, 14 Mar 2012 14:55:27 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120859/how-the-10kw-e-cat-will-be-integrated-into-various-heating-systems/ Do you expect any relevant scientific news from universities or from any other academic research centres soon? http://faq.ecat.com/120858/do-you-expect-any-relevant-scientific-news-from-universities-or-from-any-other-academic-research-centres/ Wed, 14 Mar 2012 14:53:53 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120858/do-you-expect-any-relevant-scientific-news-from-universities-or-from-any-other-academic-research-centres/ How can you reduce costs to 1 cent per KWh and yet have the owners/operators recover the their investment costs? http://faq.ecat.com/120857/how-can-you-reduce-costs-to-1-cent-per-kwh-and-yet-have-the-ownersoperators-recover-the-their-investment/ Wed, 14 Mar 2012 14:50:37 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120857/how-can-you-reduce-costs-to-1-cent-per-kwh-and-yet-have-the-ownersoperators-recover-the-their-investment/ Why COP has dropped to 6? http://faq.ecat.com/120856/why-cop-has-dropped-to-6/ Wed, 14 Mar 2012 14:48:48 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120856/why-cop-has-dropped-to-6/ If you are to have the reactors in series to achieve a higher temperature why not build the group of reactors as one unit? This would reduce the number of pipes and troublesome gaskets? http://faq.ecat.com/120855/if-you-are-to-have-the-reactors-in-series-to-achieve-a-higher-temperature-why-not-build-the-group-of/ Wed, 14 Mar 2012 14:46:24 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120855/if-you-are-to-have-the-reactors-in-series-to-achieve-a-higher-temperature-why-not-build-the-group-of/ What is the approximate weight of the Industrial E-Cat? (Not including the turbine). http://faq.ecat.com/120854/what-is-the-approximate-weight-of-the-industrial-e-cat/ Wed, 14 Mar 2012 14:44:22 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120854/what-is-the-approximate-weight-of-the-industrial-e-cat/ 1) Is the returned Ni all, or mostly, available to be reused, after reprocessing, in fresh E-Cat charges? 2) Is there a limit as to how many reprocessing cycles a Ni charge can undergo before it becomes unsuitable for use in an E-cat? 3) If the Ni does become unsuitable at some point, presumably it would still be suitable for general industrial use? http://faq.ecat.com/120853/1-is-the-returned-ni-all-or-mostly-available-to-be-reused-after-reprocessing-in-fresh-e-cat-charges/ Wed, 14 Mar 2012 14:42:50 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120853/1-is-the-returned-ni-all-or-mostly-available-to-be-reused-after-reprocessing-in-fresh-e-cat-charges/ 1. Must the E-Cat be cold before the fuel rod can be safely removed? 2. If so, is there a safety mechanism that is incorporated into the E-Cat that will prevent removal at any other time? 3. Will you continue to work at raising the temperature of the reactor from 260C even though you have achieved this important milestone? 4. What do you believe to be the next milestone for the E-Cat? http://faq.ecat.com/120852/1-must-the-e-cat-be-cold-before-the-fuel-rod-can-be-safely-removed-2-if-so-is-there-a-safety-mechanism/ Wed, 14 Mar 2012 14:40:19 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120852/1-must-the-e-cat-be-cold-before-the-fuel-rod-can-be-safely-removed-2-if-so-is-there-a-safety-mechanism/ Is it possible to know the daily (24h) power consumption in kwh of the E-Cat at 1/3 of its thermal power (3,3kw), 2/3 (6,7kw) and full power (10kw) without considering the 1 hour start-up consumption? http://faq.ecat.com/120851/is-it-possible-to-know-the-daily-24h-power-consumption-in-kwh-of-the-e-cat-at-13-of-its-thermal-power/ Wed, 14 Mar 2012 14:38:52 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120851/is-it-possible-to-know-the-daily-24h-power-consumption-in-kwh-of-the-e-cat-at-13-of-its-thermal-power/ What progress are you making on the patent? Have you received any new information from the U.S. Patent office? http://faq.ecat.com/120850/what-progress-are-you-making-on-the-patent/ Wed, 14 Mar 2012 14:36:33 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120850/what-progress-are-you-making-on-the-patent/ Must the E-Cats in the MW plant be turned off when refuelling every 6 months? http://faq.ecat.com/120849/must-the-e-cats-in-the-mw-plant-be-turned-off-when-refuelling-every-6-months/ Wed, 14 Mar 2012 14:34:01 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120849/must-the-e-cats-in-the-mw-plant-be-turned-off-when-refuelling-every-6-months/ In the MW plant, is every E-Cat automatous? That is, is every E-Cat fully independent with its own control unit? If so, do the E-Cats communicate with each other in order to support each other when the need arises? Example: When an E-Cat is close to exiting the self-sustain mode and needs to be charged anew, does it put out a signal to the other E-Cats for help, and do they respond? http://faq.ecat.com/120848/in-the-mw-plant-is-every-e-cat-automatous-that-is-is-every-e-cat-fully-independent-with-its-own-control/ Wed, 14 Mar 2012 14:31:03 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120848/in-the-mw-plant-is-every-e-cat-automatous-that-is-is-every-e-cat-fully-independent-with-its-own-control/ Have you ever thought about inductive/rf heating of the ni powder? http://faq.ecat.com/120607/have-you-ever-thought-about-inductiverf-heating-of-the-ni-powder/ Mon, 12 Mar 2012 16:07:16 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120607/have-you-ever-thought-about-inductiverf-heating-of-the-ni-powder/ Considering that a home-based E-Cat may not be ideally suited to all domestic situations. Is it possible (maybe within 10-20 years) that we could see large, muli-staged, self-sustaining E-Cat power plants that could replace nuclear power plants? If built next to the existing nuclear reactor buildings, they could even maybe utilise the existing turbines/electicity distribution installations. http://faq.ecat.com/120605/considering-that-a-home-based-e-cat-may-not-be-ideally-suited-to-all-domestic-situations-is-it-possible/ Mon, 12 Mar 2012 15:38:06 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120605/considering-that-a-home-based-e-cat-may-not-be-ideally-suited-to-all-domestic-situations-is-it-possible/ Is it possible (maybe within 10-20 years) that we could see large, muli-staged, self-sustaining E-Cat power plants that could replace nuclear power plants? http://faq.ecat.com/120602/is-it-possible-maybe-within-10-20-years-that-we-could-see-large-muli-staged-self-sustaining-e-cat/ Mon, 12 Mar 2012 15:14:47 +0000 Asked by Ecat.com 2 months ago http://faq.ecat.com/120602/is-it-possible-maybe-within-10-20-years-that-we-could-see-large-muli-staged-self-sustaining-e-cat/ Could you please advice which is the best way to invest in the e-cat, shares etc. Do you have a waiting list? http://faq.ecat.com/118634/could-you-please-advice-which-is-the-best-way-to-invest-in-the-e-cat-shares-etc-do-you-have-a-waiting/ Mon, 27 Feb 2012 10:15:11 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118634/could-you-please-advice-which-is-the-best-way-to-invest-in-the-e-cat-shares-etc-do-you-have-a-waiting/ The estimated price to the public of about 700 us dollars for the ecat and large-scale product is intended for an apparatus from 10 kW or is it price per kW? http://faq.ecat.com/118633/the-estimated-price-to-the-public-of-about-700-us-dollars-for-the-ecat-and-large-scale-product-is-intended/ Mon, 27 Feb 2012 10:13:50 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118633/the-estimated-price-to-the-public-of-about-700-us-dollars-for-the-ecat-and-large-scale-product-is-intended/ What is the temperature of the output that the 1MW reactor is running at? http://faq.ecat.com/118393/what-is-the-temperature-of-the-output-that-the-1mw-reactor-is-running-at/ Thu, 23 Feb 2012 11:08:42 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118393/what-is-the-temperature-of-the-output-that-the-1mw-reactor-is-running-at/ Have you switched the 1MW device off, then on again with satisfactory results? http://faq.ecat.com/118392/have-you-switched-the-1mw-device-off-then-on-again-with-satisfactory-results/ Thu, 23 Feb 2012 11:08:05 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118392/have-you-switched-the-1mw-device-off-then-on-again-with-satisfactory-results/ Have you had the 1MW container working at 1MW, and if so for how long? http://faq.ecat.com/118391/have-you-had-the-1mw-container-working-at-1mw-and-if-so-for-how-long/ Thu, 23 Feb 2012 11:07:27 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118391/have-you-had-the-1mw-container-working-at-1mw-and-if-so-for-how-long/ Considering the large number of persons who have signed up for Home E-Cats I think it would only be fair if you as soon as possible publish a video where you demonstrate the Home E-Cat and how you establish its performance? http://faq.ecat.com/118390/considering-the-large-number-of-persons-who-have-signed-up-for-home-e-cats-i-think-it-would-only-be-fair/ Thu, 23 Feb 2012 11:04:54 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118390/considering-the-large-number-of-persons-who-have-signed-up-for-home-e-cats-i-think-it-would-only-be-fair/ We would love to see some photos from your new factory, would it be possible for you to publish some photos of you in the E-Cat factory? http://faq.ecat.com/118344/we-would-love-to-see-some-photos-from-your-new-factory-would-it-be-possible-for-you-to-publish-some/ Wed, 22 Feb 2012 13:21:54 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118344/we-would-love-to-see-some-photos-from-your-new-factory-would-it-be-possible-for-you-to-publish-some/ Considering the case of COP of 6, if E-Cat power output can be modulated by means of an external control loop? http://faq.ecat.com/118342/considering-the-case-of-cop-of-6-if-e-cat-power-output-can-be-modulated-by-means-of-an-external-control/ Wed, 22 Feb 2012 13:20:51 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118342/considering-the-case-of-cop-of-6-if-e-cat-power-output-can-be-modulated-by-means-of-an-external-control/ How long is the max self-sustained period in which the E-Cat can run continuosly without to affect the system stability? http://faq.ecat.com/118341/how-long-is-the-max-self-sustained-period-in-which-the-e-cat-can-run-continuosly-without-to-affect-the/ Wed, 22 Feb 2012 13:20:06 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118341/how-long-is-the-max-self-sustained-period-in-which-the-e-cat-can-run-continuosly-without-to-affect-the/ Yesterday it was reported that National Instruments and Leonardo Corporation/Andrea Rossi or partners are no longer doing business together. 1. Is this true? If true will this development affect your manufacturing schedule of 12-18 months? 2. Does the E-Cat have a control system ready for commercialization and manufacture in your factory? 3. Is delivery of the 1MW E-Cat to your 1st customer still on schedule (less than 1 month from now)? http://faq.ecat.com/118340/yesterday-it-was-reported-that-national-instruments-and-leonardo-corporationandrea-rossi-or-partners/ Wed, 22 Feb 2012 13:16:35 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118340/yesterday-it-was-reported-that-national-instruments-and-leonardo-corporationandrea-rossi-or-partners/ If possible I would like to understand if the higher E-Cat energy gain, recorded for long time and written on Your tecnical paper "A new energy source from nuclear fusion", were for an different E-Cat design. You garantee COP of 6 times only, and my question now is why an high COP can't be restored. http://faq.ecat.com/118339/if-possible-i-would-like-to-understand-if-the-higher-e-cat-energy-gain-recorded-for-long-time-and-written/ Wed, 22 Feb 2012 13:09:50 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118339/if-possible-i-would-like-to-understand-if-the-higher-e-cat-energy-gain-recorded-for-long-time-and-written/ Several months ago you said that although your first 1MW plant client wished to remain confidential, a second client was willing to be publicly identified and we would hear about them soon. Several months have passed and we have heard no more about this second client. Can you give us an update? http://faq.ecat.com/118126/several-months-ago-you-said-that-although-your-first-1mw-plant-client-wished-to-remain-confidential/ Fri, 17 Feb 2012 16:49:21 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118126/several-months-ago-you-said-that-although-your-first-1mw-plant-client-wished-to-remain-confidential/ Several month ago you mentioned that there may be home e-cats of 20 KW as well. When are you expecting to start to produce those? Are there larger home e-cats in works? http://faq.ecat.com/118125/several-month-ago-you-mentioned-that-there-may-be-home-e-cats-of-20-kw-as-well-when-are-you-expecting/ Fri, 17 Feb 2012 16:46:50 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118125/several-month-ago-you-mentioned-that-there-may-be-home-e-cats-of-20-kw-as-well-when-are-you-expecting/ What would happen if I had a power failure in my home such that the ecat controls AND the (cooling-) water pump stops. Would the ecat overheat? Would it be reusable? http://faq.ecat.com/118123/what-would-happen-if-i-had-a-power-failure-in-my-home-such-that-the-ecat-controls-and-the-cooling/ Fri, 17 Feb 2012 16:43:47 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118123/what-would-happen-if-i-had-a-power-failure-in-my-home-such-that-the-ecat-controls-and-the-cooling/ What would happen if I had a power failure in my home such that the ecat controls AND the (cooling-) water pump stops? http://faq.ecat.com/118122/what-would-happen-if-i-had-a-power-failure-in-my-home-such-that-the-ecat-controls-and-the-cooling/ Fri, 17 Feb 2012 16:41:28 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118122/what-would-happen-if-i-had-a-power-failure-in-my-home-such-that-the-ecat-controls-and-the-cooling/ If you can tell me, without revealing too much, the estimated steam pressures and temperatures available from a single 3 reactor 30kw unit under varying power settings (if there is more than just one setting),? http://faq.ecat.com/118121/if-you-can-tell-me-without-revealing-too-much-the-estimated-steam-pressures-and-temperatures-available/ Fri, 17 Feb 2012 16:35:23 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/118121/if-you-can-tell-me-without-revealing-too-much-the-estimated-steam-pressures-and-temperatures-available/ When will a preliminary technical specification be available for the Home E-cat? http://faq.ecat.com/117950/when-will-a-preliminary-technical-specification-be-available-for-the-home-e-cat/ Tue, 14 Feb 2012 10:51:47 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117950/when-will-a-preliminary-technical-specification-be-available-for-the-home-e-cat/ Is obtaining a US patent any big issue for you? http://faq.ecat.com/117949/is-obtaining-a-us-patent-any-big-issue-for-you/ Tue, 14 Feb 2012 10:49:40 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117949/is-obtaining-a-us-patent-any-big-issue-for-you/ Can't -any- heat source be used to generate electricity? All you need is to boil water with it, and turn a turbine with the steam generated. All power plants are built essentially this way. It should be fairly trivial to replace the heat source in an existing plant with your e-cat cell. Am I missing something? http://faq.ecat.com/117948/cant-any-heat-source-be-used-to-generate-electricity/ Tue, 14 Feb 2012 10:46:10 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117948/cant-any-heat-source-be-used-to-generate-electricity/ Can you say at this time if your theory of how eCat works, fits with the Widom-Larsen theory or does your and Prof Focardi's theory offer a different approach ? http://faq.ecat.com/117947/can-you-say-at-this-time-if-your-theory-of-how-ecat-works-fits-with-the-widom-larsen-theory-or-does/ Tue, 14 Feb 2012 10:42:37 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117947/can-you-say-at-this-time-if-your-theory-of-how-ecat-works-fits-with-the-widom-larsen-theory-or-does/ Why you don't use your E-Cat(1MW and stronger) and become the power company, supply the Electricity to the grid? http://faq.ecat.com/117946/why-you-dont-use-your-e-cat1mw-and-stronger-and-become-the-power-company-supply-the-electricity-to/ Tue, 14 Feb 2012 10:40:04 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117946/why-you-dont-use-your-e-cat1mw-and-stronger-and-become-the-power-company-supply-the-electricity-to/ Do you think you can use the e-cat in electric cars? http://faq.ecat.com/117894/do-you-think-you-can-use-the-e-cat-in-electric-cars/ Mon, 13 Feb 2012 10:41:46 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117894/do-you-think-you-can-use-the-e-cat-in-electric-cars/ You mentioned previously about a partner helping you with improving the COP. Have you had any progress in this area? http://faq.ecat.com/117893/you-mentioned-previously-about-a-partner-helping-you-with-improving-the-cop-have-you-had-any-progress/ Mon, 13 Feb 2012 10:41:06 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117893/you-mentioned-previously-about-a-partner-helping-you-with-improving-the-cop-have-you-had-any-progress/ Is the 6 month between refills just a rough estimate, a suggested replacement point, or very much exact? I understood the e-cat would adjust it's output based on demand. With higher output, wouldn't the charge last shorter? http://faq.ecat.com/117892/is-the-6-month-between-refills-just-a-rough-estimate-a-suggested-replacement-point-or-very-much-exac/ Mon, 13 Feb 2012 10:39:39 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117892/is-the-6-month-between-refills-just-a-rough-estimate-a-suggested-replacement-point-or-very-much-exac/ When do you expect to have a working version of the first Electrical E-Cat? (An "EE"-Cat.) http://faq.ecat.com/117891/when-do-you-expect-to-have-a-working-version-of-the-first-electrical-e-cat/ Mon, 13 Feb 2012 10:37:50 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117891/when-do-you-expect-to-have-a-working-version-of-the-first-electrical-e-cat/ Can you tell us how much the output of the 10Kw e-cat can be modulated? Can it produce just 1Kw? How long would it take to ramp from say 2Kw to 10Kw. http://faq.ecat.com/117889/can-you-tell-us-how-much-the-output-of-the-10kw-e-cat-can-be-modulated-can-it-produce-just-1kw/ Mon, 13 Feb 2012 10:33:40 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117889/can-you-tell-us-how-much-the-output-of-the-10kw-e-cat-can-be-modulated-can-it-produce-just-1kw/ Is it possible to apply a gamma rays detector that could immediately stop the reaction in case of accidental external emission? http://faq.ecat.com/117888/is-it-possible-to-apply-a-gamma-rays-detector-that-could-immediately-stop-the-reaction-in-case-of-accidental/ Mon, 13 Feb 2012 10:32:14 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117888/is-it-possible-to-apply-a-gamma-rays-detector-that-could-immediately-stop-the-reaction-in-case-of-accidental/ My heater , as many others I guess, is not located in the basement but instead is inside my apartment. Will it be possible to use an e-cat or not, due to safety reasons (gamma rays, …)? http://faq.ecat.com/117887/my-heater-as-many-others-i-guess-is-not-located-in-the-basement-but-instead-is-inside-my-apartment/ Mon, 13 Feb 2012 10:31:34 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117887/my-heater-as-many-others-i-guess-is-not-located-in-the-basement-but-instead-is-inside-my-apartment/ The modulation of output power is obteined modulating the reaction? In this case,the electric input is in proporzional dimension with the output obtained? And then,after it has started with resistor,could be possible to keep it stable using the thermal power? http://faq.ecat.com/117886/the-modulation-of-output-power-is-obteined-modulating-the-reaction-in-this-casethe-electric-input-is/ Mon, 13 Feb 2012 10:30:06 +0000 Asked by Ecat.com 3 months ago http://faq.ecat.com/117886/the-modulation-of-output-power-is-obteined-modulating-the-reaction-in-this-casethe-electric-input-is/ What is your cost estimate for the heat pump option and will it be available initially? http://faq.ecat.com/117607/what-is-your-cost-estimate-for-the-heat-pump-option-and-will-it-be-available-initially/ Wed, 08 Feb 2012 10:26:32 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117607/what-is-your-cost-estimate-for-the-heat-pump-option-and-will-it-be-available-initially/ If I am not wrong,the reaction start at 60 °C http://faq.ecat.com/117606/if-i-am-not-wrongthe-reaction-start-at-60-c/ Wed, 08 Feb 2012 10:25:11 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117606/if-i-am-not-wrongthe-reaction-start-at-60-c/ I read that the E-Cat Home (10kW power) is under evaluation by UL for safety certification. Do you intend to ask someone to certify also the COP = 1/6? http://faq.ecat.com/117605/i-read-that-the-e-cat-home-10kw-power-is-under-evaluation-by-ul-for-safety-certification-do-you-intend/ Wed, 08 Feb 2012 10:24:01 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117605/i-read-that-the-e-cat-home-10kw-power-is-under-evaluation-by-ul-for-safety-certification-do-you-intend/ Can you tell us what certifications the home unit will carry? http://faq.ecat.com/117604/can-you-tell-us-what-certifications-the-home-unit-will-carry/ Wed, 08 Feb 2012 10:22:42 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117604/can-you-tell-us-what-certifications-the-home-unit-will-carry/ While your technology has an unlimited number of uses, and will no doubt change our world for the best, I am most looking forward to its application in space exploration? http://faq.ecat.com/117469/while-your-technology-has-an-unlimited-number-of-uses-and-will-no-doubt-change-our-world-for-the-best/ Mon, 06 Feb 2012 14:30:18 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117469/while-your-technology-has-an-unlimited-number-of-uses-and-will-no-doubt-change-our-world-for-the-best/ Instead of nickel as a "fuel" could you use a heavier element that would produce endothermic reactions? http://faq.ecat.com/117468/instead-of-nickel-as-a-fuel-could-you-use-a-heavier-element-that-would-produce-endothermic-reactions/ Mon, 06 Feb 2012 14:28:29 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117468/instead-of-nickel-as-a-fuel-could-you-use-a-heavier-element-that-would-produce-endothermic-reactions/ Just wondering how you have time to answer all of these questions, take orders yourself, and set up a manufacturing facily to produce 1 million e-cats a year? http://faq.ecat.com/117464/just-wondering-how-you-have-time-to-answer-all-of-these-questions-take-orders-yourself-and-set-up-a/ Mon, 06 Feb 2012 14:13:39 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117464/just-wondering-how-you-have-time-to-answer-all-of-these-questions-take-orders-yourself-and-set-up-a/ When I change the charge every 6 months, the "old" one is inert (no radiations), I suppose, as you have written many times. The question is this: Are there inside that charge some kind of isotopes whose semilife is some hours after having pulling it out? http://faq.ecat.com/117463/when-i-change-the-charge-every-6-months-the-old-one-is-inert-no-radiations-i-suppose-as-you-have/ Mon, 06 Feb 2012 14:12:26 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117463/when-i-change-the-charge-every-6-months-the-old-one-is-inert-no-radiations-i-suppose-as-you-have/ In your previous answer you have spoken about an unexpected efficiency improvement: Is it related to COP or to electric power conversion? You consistently pointed out a COP 6. I would like to know how easily (from an economic, technological and time point of views) it could be improved and your opinion about the opportunity to do so. http://faq.ecat.com/117097/in-your-previous-answer-you-have-spoken-about-an-unexpected-efficiency-improvement-is-it-related-to/ Thu, 02 Feb 2012 10:42:35 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117097/in-your-previous-answer-you-have-spoken-about-an-unexpected-efficiency-improvement-is-it-related-to/ When you will release a second generation e-cats, so able to produce also electric power with a 30% efficiency, could you set up them (3,4 … all the necessary ones case by case) to work as a "system" in such a way that the user doesn't need to buy the electric power (very expensive expecially here in Italy) necessary to get warm? A system that produces itself the electric power necessary to get warm (expect the one necessary to start the first reaction) http://faq.ecat.com/117096/when-you-will-release-a-second-generation-e-cats-so-able-to-produce-also-electric-power-with-a-30-efficiency/ Thu, 02 Feb 2012 10:40:21 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117096/when-you-will-release-a-second-generation-e-cats-so-able-to-produce-also-electric-power-with-a-30-efficiency/ Reading Your answers in blog and interviews in internet I created preliminary schedules of You main works for 2012 :) 1. 2012 March, April – start of improved 1 Mw plant. 2. 2012 from February till November – building of robotized plant for E cats. 3. 2012 November – test production for 10 kw home Ecats. 4. 2012 December – successful start of sales 10 kw home Ecats. Maybe You have some remarks for this schedule ? Could You tell us more about others important tasks and dates for Ecats production http://faq.ecat.com/117095/reading-your-answers-in-blog-and-interviews-in-internet-i-created-preliminary-schedules-of-you-main-works/ Thu, 02 Feb 2012 10:36:32 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/117095/reading-your-answers-in-blog-and-interviews-in-internet-i-created-preliminary-schedules-of-you-main-works/ Is it possible to see pictures of the rooms where E-cats are tested 24 hours per day? http://faq.ecat.com/116902/is-it-possible-to-see-pictures-of-the-rooms-where-e-cats-are-tested-24-hours-per-day/ Tue, 31 Jan 2012 08:07:15 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116902/is-it-possible-to-see-pictures-of-the-rooms-where-e-cats-are-tested-24-hours-per-day/ In your last video interview in a warehouse…you are seated and to your left is a vertical heater with a diffusion cap for heating the space. If, as you say, there are ecats heating your home as well as others as test devices, why are there not Ecats heating this warehouse as well? http://faq.ecat.com/116791/in-your-last-video-interview-in-a-warehouseyou-are-seated-and-to-your-left-is-a-vertical-heater-with/ Sun, 29 Jan 2012 15:24:17 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116791/in-your-last-video-interview-in-a-warehouseyou-are-seated-and-to-your-left-is-a-vertical-heater-with/ In which country do you think Certifications of the Home E-Cat will be achieved first? http://faq.ecat.com/116790/in-which-country-do-you-think-certifications-of-the-home-e-cat-will-be-achieved-first/ Sun, 29 Jan 2012 15:21:51 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116790/in-which-country-do-you-think-certifications-of-the-home-e-cat-will-be-achieved-first/ Are the first units already made with such material so they could withstand 400 degrees? Or will the retrofitting be a complicated process? http://faq.ecat.com/116644/are-the-first-units-already-made-with-such-material-so-they-could-withstand-400-degrees/ Thu, 26 Jan 2012 18:46:33 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116644/are-the-first-units-already-made-with-such-material-so-they-could-withstand-400-degrees/ I wonder if it is possible to create unit to produce electricity, in between 100KW and 1 MW and also between 1MW and 10MW, to be marketed? http://faq.ecat.com/116643/i-wonder-if-it-is-possible-to-create-unit-to-produce-electricity-in-between-100kw-and-1-mw-and-also/ Thu, 26 Jan 2012 18:44:31 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116643/i-wonder-if-it-is-possible-to-create-unit-to-produce-electricity-in-between-100kw-and-1-mw-and-also/ Have you ever been approached by "certain global powers" requesting you to hold back on your planned time-line of goals? http://faq.ecat.com/116642/have-you-ever-been-approached-by-certain-global-powers-requesting-you-to-hold-back-on-your-planned/ Thu, 26 Jan 2012 18:42:10 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116642/have-you-ever-been-approached-by-certain-global-powers-requesting-you-to-hold-back-on-your-planned/ When you will be ready to deliver e-cats to people who pre-ordered, how will you manage the payments? A full payment when order confirmed, or a partial payment at confirmation and full payment when delivered? http://faq.ecat.com/116381/when-you-will-be-ready-to-deliver-e-cats-to-people-who-pre-ordered-how-will-you-manage-the-payments/ Mon, 23 Jan 2012 12:08:31 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116381/when-you-will-be-ready-to-deliver-e-cats-to-people-who-pre-ordered-how-will-you-manage-the-payments/ Your heat generator claims a COP of 6 but in your experiment of 2008-5-28 you reached a COP of 415. How can you assure customers that ecat is safe and stable? Once we bought one "standard ecat" what could stop someone to try to increase its output power? Any important risks in this process? http://faq.ecat.com/116380/your-heat-generator-claims-a-cop-of-6-but-in-your-experiment-of-2008-5-28-you-reached-a-cop-of-415-how/ Mon, 23 Jan 2012 12:05:00 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116380/your-heat-generator-claims-a-cop-of-6-but-in-your-experiment-of-2008-5-28-you-reached-a-cop-of-415-how/ Why not use a chemical reaction (which can be very powerful in a short time) to create the right temperature to achieve self sustenance of 'cat and that could be triggered by a cartridge inserted into the system and be ejected at the end of the task by the system itself. http://faq.ecat.com/116379/why-not-use-a-chemical-reaction-which-can-be-very-powerful-in-a-short-time-to-create-the-right-temperature/ Mon, 23 Jan 2012 11:59:49 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116379/why-not-use-a-chemical-reaction-which-can-be-very-powerful-in-a-short-time-to-create-the-right-temperature/ If the home unit can run in self-sustain mode doesn't that mean that the COP becomes much, much higher than 6? http://faq.ecat.com/116378/if-the-home-unit-can-run-in-self-sustain-mode-doesnt-that-mean-that-the-cop-becomes-much-much-higher/ Mon, 23 Jan 2012 11:57:28 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116378/if-the-home-unit-can-run-in-self-sustain-mode-doesnt-that-mean-that-the-cop-becomes-much-much-higher/ I saw on your latest video the 1MW contanier still on the laboratory, and now I'm worried that the customer may have returned it to you, for some kind of problems. Is it the same container of October test, or it is another one? If it's another can you confirm that the first one is performing good? http://faq.ecat.com/116377/i-saw-on-your-latest-video-the-1mw-contanier-still-on-the-laboratory-and-now-im-worried-that-the-customer/ Mon, 23 Jan 2012 11:51:38 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116377/i-saw-on-your-latest-video-the-1mw-contanier-still-on-the-laboratory-and-now-im-worried-that-the-customer/ What do you think about using micro-waves for initial heating of the E-Cat? http://faq.ecat.com/116376/what-do-you-think-about-using-micro-waves-for-initial-heating-of-the-e-cat/ Mon, 23 Jan 2012 11:47:53 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/116376/what-do-you-think-about-using-micro-waves-for-initial-heating-of-the-e-cat/ You have been able to reduce the size of the home e-Cat down to 'laptop' size. Does this also imply that you will be able to reduce the size of the 1MW e-Cat as well? http://faq.ecat.com/115985/you-have-been-able-to-reduce-the-size-of-the-home-e-cat-down-to-laptop-size-does-this-also-imply-that/ Wed, 18 Jan 2012 10:40:51 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115985/you-have-been-able-to-reduce-the-size-of-the-home-e-cat-down-to-laptop-size-does-this-also-imply-that/ How small can an e-cat device be? http://faq.ecat.com/115984/how-small-can-an-e-cat-device-be/ Wed, 18 Jan 2012 10:34:55 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115984/how-small-can-an-e-cat-device-be/ How does the E-Cat behave during warm periods of the year, when heating the home is not needed ? Is always off? http://faq.ecat.com/115983/how-does-the-e-cat-behave-during-warm-periods-of-the-year-when-heating-the-home-is-not-needed/ Wed, 18 Jan 2012 10:33:06 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115983/how-does-the-e-cat-behave-during-warm-periods-of-the-year-when-heating-the-home-is-not-needed/ Can the current ecat technology and temperatures be used effectively for desalinization of sea-water? http://faq.ecat.com/115982/can-the-current-ecat-technology-and-temperatures-be-used-effectively-for-desalinization-of-sea-water/ Wed, 18 Jan 2012 10:30:52 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115982/can-the-current-ecat-technology-and-temperatures-be-used-effectively-for-desalinization-of-sea-water/ Is there a risk of overheating the reactor? http://faq.ecat.com/115981/is-there-a-risk-of-overheating-the-reactor/ Wed, 18 Jan 2012 10:27:50 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115981/is-there-a-risk-of-overheating-the-reactor/ Domestic E-Cat will be delivered with differents heat exchanger: Boiler for hot water, heat exchanger for hot air, full cupper electrode to replace steatite water heater? http://faq.ecat.com/115980/domestic-e-cat-will-be-delivered-with-differents-heat-exchanger-boiler-for-hot-water-heat-exchanger/ Wed, 18 Jan 2012 10:12:44 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115980/domestic-e-cat-will-be-delivered-with-differents-heat-exchanger-boiler-for-hot-water-heat-exchanger/ I read that you're solving the problem of production of hot water. Do you think that with the first generation of e-cats this issue is going to be solved. http://faq.ecat.com/115979/i-read-that-youre-solving-the-problem-of-production-of-hot-water-do-you-think-that-with-the-first-generation/ Wed, 18 Jan 2012 10:08:02 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115979/i-read-that-youre-solving-the-problem-of-production-of-hot-water-do-you-think-that-with-the-first-generation/ "…UL makes safety certification. They make all the tests necessary to guarantee the safety of the device…" I suppose that UL will test a running E-Cat and that they will measure all parameters including the presence of radiation in the ambient. Infact, speaking of safety, radiations outside of a running E-Cat are really very important. Is it true?e http://faq.ecat.com/115978/ul-makes-safety-certification-they-make-all-the-tests-necessary-to-guarantee-the-safety-of-the-device/ Wed, 18 Jan 2012 10:05:38 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115978/ul-makes-safety-certification-they-make-all-the-tests-necessary-to-guarantee-the-safety-of-the-device/ I have read that you have sent a prototype ecat to the UL certification organisation. Is this the only needed certification? What kind of test will they perform? http://faq.ecat.com/115913/i-have-read-that-you-have-sent-a-prototype-ecat-to-the-ul-certification-organisation-is-this-the-only/ Tue, 17 Jan 2012 13:32:16 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115913/i-have-read-that-you-have-sent-a-prototype-ecat-to-the-ul-certification-organisation-is-this-the-only/ Will your technology be scalable to greater than 1MWh for use in energy intensive industries like major power plants or metal ore extraction and foundries? http://faq.ecat.com/115912/will-your-technology-be-scalable-to-greater-than-1mwh-for-use-in-energy-intensive-industries-like-major/ Tue, 17 Jan 2012 13:29:03 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115912/will-your-technology-be-scalable-to-greater-than-1mwh-for-use-in-energy-intensive-industries-like-major/ Will there ever be danger of explosion or overheating under an input power surge, self-sustain, climate conditions or a customer somehow tampering with the device? http://faq.ecat.com/115911/will-there-ever-be-danger-of-explosion-or-overheating-under-an-input-power-surge-self-sustain-climate/ Tue, 17 Jan 2012 13:26:54 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115911/will-there-ever-be-danger-of-explosion-or-overheating-under-an-input-power-surge-self-sustain-climate/ Is it possible to sell the E-cat Home Unit with electric output or will it be 6 months to a year after the original E-cats? http://faq.ecat.com/115910/is-it-possible-to-sell-the-e-cat-home-unit-with-electric-output-or-will-it-be-6-months-to-a-year-after/ Tue, 17 Jan 2012 13:25:38 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115910/is-it-possible-to-sell-the-e-cat-home-unit-with-electric-output-or-will-it-be-6-months-to-a-year-after/ I have ordered your e-cat a month or so ago and can not wait for its delivery. Whether it be a heat pump or gas heating system there is no boiler involved. Will it be necessary to remove the heat pumps and gas central heat and replace them with a boiler? http://faq.ecat.com/115855/i-have-ordered-your-e-cat-a-month-or-so-ago-and-can-not-wait-for-its-delivery-whether-it-be-a-heat-pump/ Mon, 16 Jan 2012 12:45:50 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115855/i-have-ordered-your-e-cat-a-month-or-so-ago-and-can-not-wait-for-its-delivery-whether-it-be-a-heat-pump/ At what point will you release detail product specifications about the domestic E-Cat? http://faq.ecat.com/115854/at-what-point-will-you-release-detail-product-specifications-about-the-domestic-e-cat/ Mon, 16 Jan 2012 12:44:08 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115854/at-what-point-will-you-release-detail-product-specifications-about-the-domestic-e-cat/ There is a rumor going about that you are having trouble stabilizing the e-cats due to non-homogeneous evolution of energy within the Ni powder that melts the powder locally and shuts the process down? http://faq.ecat.com/115853/there-is-a-rumor-going-about-that-you-are-having-trouble-stabilizing-the-e-cats-due-to-non-homogeneous/ Mon, 16 Jan 2012 12:42:54 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115853/there-is-a-rumor-going-about-that-you-are-having-trouble-stabilizing-the-e-cats-due-to-non-homogeneous/ It was told already that in the E-Cat only some nickel isotopes take part in process of transmutation into copper. My question is. If it was possible to enrich the nickel (at low cost) with these isotopes, will it be more of that fuel burned (transmuted into copper)and the work of reactor extended for some additional time? http://faq.ecat.com/115852/it-was-told-already-that-in-the-e-cat-only-some-nickel-isotopes-take-part-in-process-of-transmutation/ Mon, 16 Jan 2012 12:40:37 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115852/it-was-told-already-that-in-the-e-cat-only-some-nickel-isotopes-take-part-in-process-of-transmutation/ Would it be possible to change the auxiliary electrical heating for the e-cat to a gas burner? http://faq.ecat.com/115851/would-it-be-possible-to-change-the-auxiliary-electrical-heating-for-the-e-cat-to-a-gas-burner/ Mon, 16 Jan 2012 12:39:23 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115851/would-it-be-possible-to-change-the-auxiliary-electrical-heating-for-the-e-cat-to-a-gas-burner/ In order to reduce external electrical energy consumption, would it not be possible for two Home-Cats (A and B) to heat each other? http://faq.ecat.com/115850/in-order-to-reduce-external-electrical-energy-consumption-would-it-not-be-possible-for-two-home-cats/ Mon, 16 Jan 2012 12:38:25 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115850/in-order-to-reduce-external-electrical-energy-consumption-would-it-not-be-possible-for-two-home-cats/ I want to build a house out in the country. The cost to bury a electric line 800 feet to the building site is $5000. That is 10x more then your E-Cat, My plan is to put my first E-Cat in my existing house for heat and build my new house when the electric E-Cat comes to market so I don't have to bury a electric line. My question is, Will it be possible to build my house off the grid using the electric E-Cat when it come to market? http://faq.ecat.com/115849/i-want-to-build-a-house-out-in-the-country-the-cost-to-bury-a-electric-line-800-feet-to-the-building/ Mon, 16 Jan 2012 12:37:20 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115849/i-want-to-build-a-house-out-in-the-country-the-cost-to-bury-a-electric-line-800-feet-to-the-building/ What is the minimal electrical energy requirement if some auxiliary gas heater is used to help bring the unit to 120°C? http://faq.ecat.com/115848/what-is-the-minimal-electrical-energy-requirement-if-some-auxiliary-gas-heater-is-used-to-help-bring/ Mon, 16 Jan 2012 12:35:17 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115848/what-is-the-minimal-electrical-energy-requirement-if-some-auxiliary-gas-heater-is-used-to-help-bring/ Last December you had mentioned that you had a breakthrough with your new fluid selection and managed to obtain steam at 400C. However yesterday you mentioned that your current benchmark is 200C. Is it because it's different between the 1MW and the home-cat versions? http://faq.ecat.com/115736/last-december-you-had-mentioned-that-you-had-a-breakthrough-with-your-new-fluid-selection-and-managed/ Sat, 14 Jan 2012 14:00:18 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115736/last-december-you-had-mentioned-that-you-had-a-breakthrough-with-your-new-fluid-selection-and-managed/ Your statement of $50/kW for the home e-cat is very exciting. What do you expect the running costs for a 10kW unit to be? On ecat.com it specifies $1/MWh operating and maintenance cost for the 1MW plant. Do you have a figure for the e-cat home yet? http://faq.ecat.com/115735/your-statement-of-50kw-for-the-home-e-cat-is-very-exciting-what-do-you-expect-the-running-costs-for/ Sat, 14 Jan 2012 13:57:57 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115735/your-statement-of-50kw-for-the-home-e-cat-is-very-exciting-what-do-you-expect-the-running-costs-for/ Will the E-Cat output power be proportionally selectable (by either a thermostate or by human intervention)? http://faq.ecat.com/115734/will-the-e-cat-output-power-be-proportionally-selectable-by-either-a-thermostate-or-by-human-intervention/ Sat, 14 Jan 2012 13:56:36 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115734/will-the-e-cat-output-power-be-proportionally-selectable-by-either-a-thermostate-or-by-human-intervention/ Will an E-cat be able to be switched on and off easily and if so, is that a quick process? http://faq.ecat.com/115733/will-an-e-cat-be-able-to-be-switched-on-and-off-easily-and-if-so-is-that-a-quick-process/ Sat, 14 Jan 2012 13:55:56 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115733/will-an-e-cat-be-able-to-be-switched-on-and-off-easily-and-if-so-is-that-a-quick-process/ Will the E-cat, as you envision it to be produced now, be able to run in self sustained mode? I.e.: Once powered up, will it require input power for its control circuits, only? http://faq.ecat.com/115732/will-the-e-cat-as-you-envision-it-to-be-produced-now-be-able-to-run-in-self-sustained-mode/ Sat, 14 Jan 2012 13:55:16 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115732/will-the-e-cat-as-you-envision-it-to-be-produced-now-be-able-to-run-in-self-sustained-mode/ Have you already any clue about the (approx.) final size the domestic ECat will be? http://faq.ecat.com/115731/have-you-already-any-clue-about-the-approx-final-size-the-domestic-ecat-will-be/ Sat, 14 Jan 2012 13:54:37 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115731/have-you-already-any-clue-about-the-approx-final-size-the-domestic-ecat-will-be/ Can it in an emergency situation/brownout be run on 12/24 volts for a limited time? http://faq.ecat.com/115730/can-it-in-an-emergency-situationbrownout-be-run-on-1224-volts-for-a-limited-time/ Sat, 14 Jan 2012 13:53:40 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115730/can-it-in-an-emergency-situationbrownout-be-run-on-1224-volts-for-a-limited-time/ Will the home Ecat be able to be switched between 110 and 220 volt input? http://faq.ecat.com/115729/will-the-home-ecat-be-able-to-be-switched-between-110-and-220-volt-input/ Sat, 14 Jan 2012 13:53:01 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115729/will-the-home-ecat-be-able-to-be-switched-between-110-and-220-volt-input/ Will the next gen ecat be self-sustained by using it's own generated electricity to control the LENR reaction? That would raise the COP immensely, correct? http://faq.ecat.com/115728/will-the-next-gen-ecat-be-self-sustained-by-using-its-own-generated-electricity-to-control-the-lenr/ Sat, 14 Jan 2012 13:52:16 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115728/will-the-next-gen-ecat-be-self-sustained-by-using-its-own-generated-electricity-to-control-the-lenr/ I just read that it will now be possible for the enduser to change the fuel for the ecat themself? Has this recently changed? http://faq.ecat.com/115727/i-just-read-that-it-will-now-be-possible-for-the-enduser-to-change-the-fuel-for-the-ecat-themself/ Sat, 14 Jan 2012 13:51:33 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115727/i-just-read-that-it-will-now-be-possible-for-the-enduser-to-change-the-fuel-for-the-ecat-themself/ Where will consumers purchase their fuel? http://faq.ecat.com/115726/where-will-consumers-purchase-their-fuel/ Sat, 14 Jan 2012 13:50:36 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115726/where-will-consumers-purchase-their-fuel/ How much will it cost for a 6-month refuel of the Ecat? http://faq.ecat.com/115725/how-much-will-it-cost-for-a-6-month-refuel-of-the-ecat/ Sat, 14 Jan 2012 13:49:55 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115725/how-much-will-it-cost-for-a-6-month-refuel-of-the-ecat/ Why the decision to allow E-Cat owners to refuel their own machines? (previously you had said your agents would have to do this) http://faq.ecat.com/115724/why-the-decision-to-allow-e-cat-owners-to-refuel-their-own-machines/ Sat, 14 Jan 2012 13:49:12 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115724/why-the-decision-to-allow-e-cat-owners-to-refuel-their-own-machines/ Will there be the possibility to upgrade the 1st generation e-cat to a unit generating electric power for self sustained mode? The reason i ask is, that with a COP of 6 and electricity costs of ~0,17 EUR/kWh (Austria), the savings would be almost 0, compared with our current wood-gasifier heating system. http://faq.ecat.com/115723/will-there-be-the-possibility-to-upgrade-the-1st-generation-e-cat-to-a-unit-generating-electric-power/ Sat, 14 Jan 2012 13:48:20 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115723/will-there-be-the-possibility-to-upgrade-the-1st-generation-e-cat-to-a-unit-generating-electric-power/ When do you expect that the E-Cats will be ready for the retrofitting for electrical power? http://faq.ecat.com/115722/when-do-you-expect-that-the-e-cats-will-be-ready-for-the-retrofitting-for-electrical-power/ Sat, 14 Jan 2012 13:46:49 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115722/when-do-you-expect-that-the-e-cats-will-be-ready-for-the-retrofitting-for-electrical-power/ How much has changed Ecat in the last three months? http://faq.ecat.com/115721/how-much-has-changed-ecat-in-the-last-three-months/ Sat, 14 Jan 2012 13:45:59 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115721/how-much-has-changed-ecat-in-the-last-three-months/ On 5th Jan you mentioned that the E-Cat home will be available in August 2012 to everyone in the world through a network of licensees. Does this mean you are already in the process of getting EU certification for the e-cat home? http://faq.ecat.com/115615/on-5th-jan-you-mentioned-that-the-e-cat-home-will-be-available-in-august-2012-to-everyone-in-the-world/ Thu, 12 Jan 2012 13:09:00 +0000 Asked by Ecat.com 4 months ago http://faq.ecat.com/115615/on-5th-jan-you-mentioned-that-the-e-cat-home-will-be-available-in-august-2012-to-everyone-in-the-world/ I would like to know if an e-cat of 10 kw is enough to heat a 100-square-meter house?. http://faq.ecat.com/115505/i-would-like-to-know-if-an-e-cat-of-10-kw-is-enough-to-heat-a-100-square-meter-house/ Tue, 10 Jan 2012 18:31:53 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115505/i-would-like-to-know-if-an-e-cat-of-10-kw-is-enough-to-heat-a-100-square-meter-house/ Are you able to publicly name the company who is the second customer of one of your 1MW eCat systems? http://faq.ecat.com/115403/are-you-able-to-publicly-name-the-company-who-is-the-second-customer-of-one-of-your-1mw-ecat-systems/ Mon, 09 Jan 2012 13:56:50 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115403/are-you-able-to-publicly-name-the-company-who-is-the-second-customer-of-one-of-your-1mw-ecat-systems/ The recent review of costs has greatly reduced the expected price of the 10Kw home module did it also affect the 1MW module end price? http://faq.ecat.com/115402/the-recent-review-of-costs-has-greatly-reduced-the-expected-price-of-the-10kw-home-module-did-it-also/ Mon, 09 Jan 2012 13:55:19 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115402/the-recent-review-of-costs-has-greatly-reduced-the-expected-price-of-the-10kw-home-module-did-it-also/ Do you think the electrical power the future E-Cat will generate could to be stored into batteries like solar powered system do for those of us that want an off the grid home in case of long power outages? http://faq.ecat.com/115401/do-you-think-the-electrical-power-the-future-e-cat-will-generate-could-to-be-stored-into-batteries-like/ Mon, 09 Jan 2012 13:53:59 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115401/do-you-think-the-electrical-power-the-future-e-cat-will-generate-could-to-be-stored-into-batteries-like/ If you set the "H-Cat" output water temp to < 120°F ( http://faq.ecat.com/115400/if-you-set-the-h-cat-output-water-temp-to-120f/ Mon, 09 Jan 2012 13:52:43 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115400/if-you-set-the-h-cat-output-water-temp-to-120f/ If my home requires 5kWh for heating or cooling at night will the "H-Cat" only need half the electric power to run than it does when running at 10kW? http://faq.ecat.com/115399/if-my-home-requires-5kwh-for-heating-or-cooling-at-night-will-the-h-cat-only-need-half-the-electric/ Mon, 09 Jan 2012 13:51:52 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115399/if-my-home-requires-5kwh-for-heating-or-cooling-at-night-will-the-h-cat-only-need-half-the-electric/ I understand that you have been negotiating with Home Depot? Have they seen the Ecat yet? Has it been tested for them? http://faq.ecat.com/115398/i-understand-that-you-have-been-negotiating-with-home-depot-have-they-seen-the-ecat-yet/ Mon, 09 Jan 2012 13:50:20 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115398/i-understand-that-you-have-been-negotiating-with-home-depot-have-they-seen-the-ecat-yet/ Can you tell us anything new about the nature of your recent breakthrough that will let you build the Ecat more cheaply? What part of the Ecat does it relate to? What was the previous cost issue that you can now avoid? http://faq.ecat.com/115397/can-you-tell-us-anything-new-about-the-nature-of-your-recent-breakthrough-that-will-let-you-build-the/ Mon, 09 Jan 2012 13:49:17 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115397/can-you-tell-us-anything-new-about-the-nature-of-your-recent-breakthrough-that-will-let-you-build-the/ Your previous answers to different persons leads to believe that there is the possibility that a second generation 1Mw plant could be built at 1/10th of the current price? http://faq.ecat.com/115396/your-previous-answers-to-different-persons-leads-to-believe-that-there-is-the-possibility-that-a-second/ Mon, 09 Jan 2012 13:46:57 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115396/your-previous-answers-to-different-persons-leads-to-believe-that-there-is-the-possibility-that-a-second/ While the recent news about domestic E-cats has certainly been exciting, I'm curious, has there been any additional sales in your 1MW E-cats beyond the previous 13 sales you have announced? http://faq.ecat.com/115395/while-the-recent-news-about-domestic-e-cats-has-certainly-been-exciting-im-curious-has-there-been/ Mon, 09 Jan 2012 13:45:11 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115395/while-the-recent-news-about-domestic-e-cats-has-certainly-been-exciting-im-curious-has-there-been/ For the household e-cat unit, how do you plan to balance heat production to the heating demand of the house? http://faq.ecat.com/115394/for-the-household-e-cat-unit-how-do-you-plan-to-balance-heat-production-to-the-heating-demand-of-the/ Mon, 09 Jan 2012 13:43:46 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115394/for-the-household-e-cat-unit-how-do-you-plan-to-balance-heat-production-to-the-heating-demand-of-the/ What about propelling a car with the Guy Negre's air motor? http://faq.ecat.com/115393/what-about-propelling-a-car-with-the-guy-negres-air-motor/ Mon, 09 Jan 2012 13:41:53 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115393/what-about-propelling-a-car-with-the-guy-negres-air-motor/ How do you plan on creating a service network for refueling the Ecats every 6 month? Is this so simple that anyone can do it? http://faq.ecat.com/115130/how-do-you-plan-on-creating-a-service-network-for-refueling-the-ecats-every-6-month/ Wed, 04 Jan 2012 13:39:23 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115130/how-do-you-plan-on-creating-a-service-network-for-refueling-the-ecats-every-6-month/ Can you provide us any more information on the E-Cat that was sold as a result of the November 28th demonstration. Is it operating? How is it being used? http://faq.ecat.com/115129/can-you-provide-us-any-more-information-on-the-e-cat-that-was-sold-as-a-result-of-the-november-28th-demonstration/ Wed, 04 Jan 2012 13:37:23 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115129/can-you-provide-us-any-more-information-on-the-e-cat-that-was-sold-as-a-result-of-the-november-28th-demonstration/ You speak of your 1st generation home E-Cat providing both heat and cooling. Through what mechanism can your machine provide cooling? http://faq.ecat.com/115128/you-speak-of-your-1st-generation-home-e-cat-providing-both-heat-and-cooling-through-what-mechanism-can/ Wed, 04 Jan 2012 13:36:18 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/115128/you-speak-of-your-1st-generation-home-e-cat-providing-both-heat-and-cooling-through-what-mechanism-can/ Are the home plants in the possition to produce enough constant heat for radiators and hot water heat storage? http://faq.ecat.com/114884/are-the-home-plants-in-the-possition-to-produce-enough-constant-heat-for-radiators-and-hot-water-heat/ Thu, 29 Dec 2011 14:21:56 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114884/are-the-home-plants-in-the-possition-to-produce-enough-constant-heat-for-radiators-and-hot-water-heat/ Will it be possible to install the home unit e-cat instead a conventional (Gas-)Heating system and in an existing heat circuit? http://faq.ecat.com/114883/will-it-be-possible-to-install-the-home-unit-e-cat-instead-a-conventional-gas-heating-system-and-in/ Thu, 29 Dec 2011 14:20:51 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114883/will-it-be-possible-to-install-the-home-unit-e-cat-instead-a-conventional-gas-heating-system-and-in/ How heavy will this unit (10 kw E-Cat) be? http://faq.ecat.com/114882/how-heavy-will-this-unit-10-kw-e-cat-be/ Thu, 29 Dec 2011 14:19:53 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114882/how-heavy-will-this-unit-10-kw-e-cat-be/ How is your progress on the second 1MW plant? Is this being built in the US? Can you tell us yet where in the US the work is being done? http://faq.ecat.com/114881/how-is-your-progress-on-the-second-1mw-plant-is-this-being-built-in-the-us/ Thu, 29 Dec 2011 14:17:48 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114881/how-is-your-progress-on-the-second-1mw-plant-is-this-being-built-in-the-us/ Regarding your recent improvement in cost and efficiency for the 10KW products. Is there any chance you can share with us the name of the partner that has helped you make this improvement? Or tell us more information about the improvement itself http://faq.ecat.com/114880/regarding-your-recent-improvement-in-cost-and-efficiency-for-the-10kw-products-is-there-any-chance-you/ Thu, 29 Dec 2011 14:16:32 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114880/regarding-your-recent-improvement-in-cost-and-efficiency-for-the-10kw-products-is-there-any-chance-you/ Are you really telling that you can make 1 million e-cats in a year (2740 per day)? http://faq.ecat.com/114879/are-you-really-telling-that-you-can-make-1-million-e-cats-in-a-year-2740-per-day/ Thu, 29 Dec 2011 14:14:00 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114879/are-you-really-telling-that-you-can-make-1-million-e-cats-in-a-year-2740-per-day/ Has your customer provided feedback to you from their acceptance test, plus their use so far with the system that would assist you in future demonstrations to your prospective clients? http://faq.ecat.com/114511/has-your-customer-provided-feedback-to-you-from-their-acceptance-test-plus-their-use-so-far-with-the/ Mon, 19 Dec 2011 09:54:01 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114511/has-your-customer-provided-feedback-to-you-from-their-acceptance-test-plus-their-use-so-far-with-the/ Is it possible for you (only if you can…) write something about the values of the most important parameters in the plant reached till now? In example the output thermal and electric powers, and the maximum selfsustain time? http://faq.ecat.com/114510/is-it-possible-for-you-only-if-you-can-write-something-about-the-values-of-the-most-important-parameters/ Mon, 19 Dec 2011 09:52:30 +0000 Asked by Ecat.com 5 months ago http://faq.ecat.com/114510/is-it-possible-for-you-only-if-you-can-write-something-about-the-values-of-the-most-important-parameters/ Do you anything about ORC ? ORC is a product by Turboden and it could be a valid solution for e cat to convert thermal power in electric power http://faq.ecat.com/114291/do-you-anything-about-orc/ Mon, 12 Dec 2011 13:22:10 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114291/do-you-anything-about-orc/ When do you expect potential clients can view a working 1 MW plant? http://faq.ecat.com/114290/when-do-you-expect-potential-clients-can-view-a-working-1-mw-plant/ Mon, 12 Dec 2011 13:18:57 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114290/when-do-you-expect-potential-clients-can-view-a-working-1-mw-plant/ Can you please share in which US state the E-Cat modules and the 1 MW E-Cat plants are being built and tested? http://faq.ecat.com/114289/can-you-please-share-in-which-us-state-the-e-cat-modules-and-the-1-mw-e-cat-plants-are-being-built-and/ Mon, 12 Dec 2011 13:18:09 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114289/can-you-please-share-in-which-us-state-the-e-cat-modules-and-the-1-mw-e-cat-plants-are-being-built-and/ Why the 1MW plant seems be not equipped with a real condensate drain to get collection of condensate as good common practice? http://faq.ecat.com/114113/why-the-1mw-plant-seems-be-not-equipped-with-a-real-condensate-drain-to-get-collection-of-condensate/ Fri, 09 Dec 2011 08:32:31 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114113/why-the-1mw-plant-seems-be-not-equipped-with-a-real-condensate-drain-to-get-collection-of-condensate/ How can You explain that the 1MW plant (52 E-cat modules I understood) had been loaded with only 1,7g of Hydrogen even if in the test ot 6 October 1.5g of Hydrogen loaded for a single module E-Cat. Can You explain how did You get 2 bar minimum of Hydrogen pressure in each reactors declared as preferred pressure range on Your patent? http://faq.ecat.com/114112/how-can-you-explain-that-the-1mw-plant-52-e-cat-modules-i-understood-had-been-loaded-with-only-17g/ Fri, 09 Dec 2011 08:31:39 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114112/how-can-you-explain-that-the-1mw-plant-52-e-cat-modules-i-understood-had-been-loaded-with-only-17g/ During test of 1MW plant of 28 October the produced steam did not was visible in any photo or any short film and there was not a valve to release steam in atmophere as witness of steam presence (measured temperature of 104.5°C is not garantee that has been produced only steam). How can we be sure that the big heat excangers did not dissipate only or in part "overheated water" instead of steam? http://faq.ecat.com/114111/during-test-of-1mw-plant-of-28-october-the-produced-steam-did-not-was-visible-in-any-photo-or-any-short/ Fri, 09 Dec 2011 08:30:31 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114111/during-test-of-1mw-plant-of-28-october-the-produced-steam-did-not-was-visible-in-any-photo-or-any-short/ What is the (expected) thermal output power of each reactor during the production of a steam at 480°C? http://faq.ecat.com/114110/what-is-the-expected-thermal-output-power-of-each-reactor-during-the-production-of-a-steam-at-480c/ Fri, 09 Dec 2011 08:29:33 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114110/what-is-the-expected-thermal-output-power-of-each-reactor-during-the-production-of-a-steam-at-480c/ Are you going to use the first 1MW plant for producing electrical power? If yes, have you redesigned the plant's layout? http://faq.ecat.com/114109/are-you-going-to-use-the-first-1mw-plant-for-producing-electrical-power/ Fri, 09 Dec 2011 08:28:31 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114109/are-you-going-to-use-the-first-1mw-plant-for-producing-electrical-power/ Do you consider a good idea to invest now in Nickel? http://faq.ecat.com/114108/do-you-consider-a-good-idea-to-invest-now-in-nickel/ Fri, 09 Dec 2011 08:25:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114108/do-you-consider-a-good-idea-to-invest-now-in-nickel/ Considering the importance of university R&D for the acceptance of your technology in terms of certification and authorisations, not to speak about the performance improvements that they may bring to your great invention, why are you still holding on instead of letting the R&D start? http://faq.ecat.com/114107/considering-the-importance-of-university-rd-for-the-acceptance-of-your-technology-in-terms-of-certification/ Fri, 09 Dec 2011 08:24:17 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114107/considering-the-importance-of-university-rd-for-the-acceptance-of-your-technology-in-terms-of-certification/ You recently stated you have signed a contract with the first "normal" customer, when do you think you will be able to publish their name? http://faq.ecat.com/114106/you-recently-stated-you-have-signed-a-contract-with-the-first-normal-customer-when-do-you-think-you/ Fri, 09 Dec 2011 08:22:39 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114106/you-recently-stated-you-have-signed-a-contract-with-the-first-normal-customer-when-do-you-think-you/ Is the industrialization process going to lower the price considerably in the short term? http://faq.ecat.com/114105/is-the-industrialization-process-going-to-lower-the-price-considerably-in-the-short-term/ Fri, 09 Dec 2011 08:22:01 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114105/is-the-industrialization-process-going-to-lower-the-price-considerably-in-the-short-term/ How is it going with the industrialization of the production of the 1MW plants? http://faq.ecat.com/114104/how-is-it-going-with-the-industrialization-of-the-production-of-the-1mw-plants/ Fri, 09 Dec 2011 08:21:06 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114104/how-is-it-going-with-the-industrialization-of-the-production-of-the-1mw-plants/ At current price of 2000 Euro per Kwh and given a granted COP of 1:6, your 1MW plats don't seem so appealing, explecially if we take into account the cost of electricity. What are you offering to your first customers to compensate the low convenience of your devices at current price? I mean are they going to be also partners or just siple clients? If just simple clients where is the real deal for them? http://faq.ecat.com/114103/at-current-price-of-2000-euro-per-kwh-and-given-a-granted-cop-of-16-your-1mw-plats-dont-seem-so-appealing/ Fri, 09 Dec 2011 08:20:14 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/114103/at-current-price-of-2000-euro-per-kwh-and-given-a-granted-cop-of-16-your-1mw-plats-dont-seem-so-appealing/ To show an e-cat working on a video livestream, a mere laboratory corner framing with a single device on a table would be enough? http://faq.ecat.com/113718/to-show-an-e-cat-working-on-a-video-livestream-a-mere-laboratory-corner-framing-with-a-single-device/ Sun, 04 Dec 2011 18:33:29 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113718/to-show-an-e-cat-working-on-a-video-livestream-a-mere-laboratory-corner-framing-with-a-single-device/ It really is a great idea putting a webcam and a couple of temperature measurements on a running E-Cat! This wouldn't be another unuseful test like those asked by skeptics or snakes, but a simple and clear demonstrations that there is a running reactor, ready for mankind, ready for each of us! http://faq.ecat.com/113716/it-really-is-a-great-idea-putting-a-webcam-and-a-couple-of-temperature-measurements-on-a-running-e-cat/ Sun, 04 Dec 2011 18:32:08 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113716/it-really-is-a-great-idea-putting-a-webcam-and-a-couple-of-temperature-measurements-on-a-running-e-cat/ Sorry about my doubt, had to ask before pre-ordering (Ni+H proton is pretty clean, if Fe was being created as well other things might show up) Please accept a pre-order for the 10 kw unit @ 4.000 € One thing that I have to ask, the unit must be re-fuelled every 6 (?) months? At what cost? http://faq.ecat.com/113519/sorry-about-my-doubt-had-to-ask-before-pre-ordering-nih-proton-is-pretty-clean-if-fe-was-being-created/ Fri, 02 Dec 2011 04:38:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113519/sorry-about-my-doubt-had-to-ask-before-pre-ordering-nih-proton-is-pretty-clean-if-fe-was-being-created/ Have you ever considered using a Nickel Aerogel as your nickel source? My understanding is the the aerogel is basically like porous solidified micro-powder and could produce a much higher surface area/volume ratio. http://faq.ecat.com/113455/have-you-ever-considered-using-a-nickel-aerogel-as-your-nickel-source/ Thu, 01 Dec 2011 03:27:40 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113455/have-you-ever-considered-using-a-nickel-aerogel-as-your-nickel-source/ Is the start-up time of the e-cat quick enough so that it could be used with a timing switch as a normal boiler would, or can you reduce the reaction low enough so it is constantly working, but the reaction can be increased rapidly when required? http://faq.ecat.com/113363/is-the-start-up-time-of-the-e-cat-quick-enough-so-that-it-could-be-used-with-a-timing-switch-as-a-normal/ Tue, 29 Nov 2011 07:19:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113363/is-the-start-up-time-of-the-e-cat-quick-enough-so-that-it-could-be-used-with-a-timing-switch-as-a-normal/ Will the 1st Generation home e-cat provide only heating, and not electricity? http://faq.ecat.com/113361/will-the-1st-generation-home-e-cat-provide-only-heating-and-not-electricity/ Tue, 29 Nov 2011 07:18:51 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113361/will-the-1st-generation-home-e-cat-provide-only-heating-and-not-electricity/ During an explosive event, the radioactive isotopes would be exposed to the environment without shielding before they would have a chance to decay. 1) Are there short lived radioactive isotopes as in your patent and paper published here? 2) Do those radioactive isotopes escape during an explosion? 3) Are you taking proper precautions yourself against such dangers? http://faq.ecat.com/113359/during-an-explosive-event-the-radioactive-isotopes-would-be-exposed-to-the-environment-without-shielding/ Tue, 29 Nov 2011 07:16:02 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113359/during-an-explosive-event-the-radioactive-isotopes-would-be-exposed-to-the-environment-without-shielding/ How long do you think it will be before there is a 1MW customer that is willing to talk about their experiences with the product and act as a reference? http://faq.ecat.com/113358/how-long-do-you-think-it-will-be-before-there-is-a-1mw-customer-that-is-willing-to-talk-about-their-experiences/ Tue, 29 Nov 2011 07:13:12 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113358/how-long-do-you-think-it-will-be-before-there-is-a-1mw-customer-that-is-willing-to-talk-about-their-experiences/ If the user modulates the hydrogen pressure, is the excess hydrogen vented into atmosphere or is it absorbed into some Hydrogen Getter material for safety? Or is the amount of vented hydrogen so small that it cannot be a safety problem? http://faq.ecat.com/113357/if-the-user-modulates-the-hydrogen-pressure-is-the-excess-hydrogen-vented-into-atmosphere-or-is-it-absorbed/ Tue, 29 Nov 2011 07:11:47 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113357/if-the-user-modulates-the-hydrogen-pressure-is-the-excess-hydrogen-vented-into-atmosphere-or-is-it-absorbed/ I am glad de see your breakthrough on electricity production. Water steam at 450°C increases greatly the energy conversion but with high pressure. Have you tried other fluids, like molten salts, exotic gases? A second heat exchanger is necessary to transfer excess calories to heat homes. Why not adding a third water-air exchanger to continue the electricity production if period heating is over? http://faq.ecat.com/113301/i-am-glad-de-see-your-breakthrough-on-electricity-production-water-steam-at-450c-increases-greatly/ Mon, 28 Nov 2011 05:38:33 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113301/i-am-glad-de-see-your-breakthrough-on-electricity-production-water-steam-at-450c-increases-greatly/ The used nickel that comes out of the core that has been transmuted does it revert back when under normal temperature, pressure and environment revert back to its original isotopic values by endothermic reaction? http://faq.ecat.com/113300/the-used-nickel-that-comes-out-of-the-core-that-has-been-transmuted-does-it-revert-back-when-under-normal/ Mon, 28 Nov 2011 05:36:04 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113300/the-used-nickel-that-comes-out-of-the-core-that-has-been-transmuted-does-it-revert-back-when-under-normal/ You told, that one core swap takes 30 minutes. Is that means, in 1 MW reactor swap process takes 30 x 52 modules = 1560 minutes = 26 hrs ? Recharge time of fuel, including time for cooling reactor, and again heating process, takes approximately 2 days. Will each the swap process makes reactor 2 days out of order? http://faq.ecat.com/113299/you-told-that-one-core-swap-takes-30-minutes-is-that-means-in-1-mw-reactor-swap-process-takes-30-x/ Mon, 28 Nov 2011 05:34:33 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113299/you-told-that-one-core-swap-takes-30-minutes-is-that-means-in-1-mw-reactor-swap-process-takes-30-x/ Having reached a 450°C temperature of output steam, I suppose you have replaced the lead with another material having an higher melting temperature. Is it true? http://faq.ecat.com/113298/having-reached-a-450c-temperature-of-output-steam-i-suppose-you-have-replaced-the-lead-with-another/ Mon, 28 Nov 2011 05:33:11 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113298/having-reached-a-450c-temperature-of-output-steam-i-suppose-you-have-replaced-the-lead-with-another/ Congratulations on achieving 450 Celsius primary fluid and stable reaction. If I may ask, is this then the target temperature for the customer's needs or is something else desired? http://faq.ecat.com/113292/congratulations-on-achieving-450-celsius-primary-fluid-and-stable-reaction-if-i-may-ask-is-this-then/ Mon, 28 Nov 2011 02:48:59 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113292/congratulations-on-achieving-450-celsius-primary-fluid-and-stable-reaction-if-i-may-ask-is-this-then/ The market is fermented, everyone wants to ECAT, every day could raise tens of orders, I might know in what terms will the distribution of nickel+ and more or less the size of a domestic appliance? http://faq.ecat.com/113291/the-market-is-fermented-everyone-wants-to-ecat-every-day-could-raise-tens-of-orders-i-might-know-in/ Mon, 28 Nov 2011 02:46:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113291/the-market-is-fermented-everyone-wants-to-ecat-every-day-could-raise-tens-of-orders-i-might-know-in/ According to the answer you gave to Brian Josephson on Focus, the University of Bologna should start working on e-cat very soon, am I right? http://faq.ecat.com/113290/according-to-the-answer-you-gave-to-brian-josephson-on-focus-the-university-of-bologna-should-start/ Mon, 28 Nov 2011 02:45:08 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113290/according-to-the-answer-you-gave-to-brian-josephson-on-focus-the-university-of-bologna-should-start/ With series-connected e-cats you should need less electric energy, because the the e-cats after the first will use an already hot fluid. What COP do you expect from series of two, tree and four? http://faq.ecat.com/113289/with-series-connected-e-cats-you-should-need-less-electric-energy-because-the-the-e-cats-after-the-first/ Mon, 28 Nov 2011 02:44:16 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113289/with-series-connected-e-cats-you-should-need-less-electric-energy-because-the-the-e-cats-after-the-first/ Did you get 450 Celsius from just one e-cat or from many of them connected in series? http://faq.ecat.com/113288/did-you-get-450-celsius-from-just-one-e-cat-or-from-many-of-them-connected-in-series/ Mon, 28 Nov 2011 02:43:07 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113288/did-you-get-450-celsius-from-just-one-e-cat-or-from-many-of-them-connected-in-series/ When do you think we will see the first e-Cat based thermoelectric plant? http://faq.ecat.com/113287/when-do-you-think-we-will-see-the-first-e-cat-based-thermoelectric-plant/ Mon, 28 Nov 2011 02:41:33 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113287/when-do-you-think-we-will-see-the-first-e-cat-based-thermoelectric-plant/ You mentioned that on that day, you had a breakthrough in generating electricity that brings significantly closer the goal itself. Would you be so kind to give us your fans some more detail, be them technical, or timeline wise? http://faq.ecat.com/113286/you-mentioned-that-on-that-day-you-had-a-breakthrough-in-generating-electricity-that-brings-significantly/ Mon, 28 Nov 2011 02:39:39 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113286/you-mentioned-that-on-that-day-you-had-a-breakthrough-in-generating-electricity-that-brings-significantly/ Will you give away your E-Cat secrets to MIT? http://faq.ecat.com/113108/will-you-give-away-your-e-cat-secrets-to-mit/ Fri, 25 Nov 2011 05:42:10 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113108/will-you-give-away-your-e-cat-secrets-to-mit/ I figure that at 7000 watts for 6 months, normal tap water will deposit something over 20 pounds (9 kilograms) of solid material in the E-Cat heat exchanger. Normal developing world, often river or reused water, will be much worse. Does the E-Cat system include a deionizer system for the feed water? http://faq.ecat.com/113107/i-figure-that-at-7000-watts-for-6-months-normal-tap-water-will-deposit-something-over-20-pounds-9-kilograms/ Fri, 25 Nov 2011 05:41:03 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113107/i-figure-that-at-7000-watts-for-6-months-normal-tap-water-will-deposit-something-over-20-pounds-9-kilograms/ The power consumption of the e-cat is rated at 1/6 of the thermal energy produced. Do you expect that the amount of consumed electric energy will or could be reduced in the future? http://faq.ecat.com/113106/the-power-consumption-of-the-e-cat-is-rated-at-16-of-the-thermal-energy-produced-do-you-expect-that/ Fri, 25 Nov 2011 05:38:51 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113106/the-power-consumption-of-the-e-cat-is-rated-at-16-of-the-thermal-energy-produced-do-you-expect-that/ I believe commercially pure nickel, such as Nickel 200, still has ~0.15% carbon by weight, in addition to other impurities. Is the 400 degree C limit of the ecat device a function of the purity of the nickel used, where graphite will start to precipitate and coat the nickel particles at ~425 degrees C? http://faq.ecat.com/113105/i-believe-commercially-pure-nickel-such-as-nickel-200-still-has-015-carbon-by-weight-in-addition/ Fri, 25 Nov 2011 05:34:41 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113105/i-believe-commercially-pure-nickel-such-as-nickel-200-still-has-015-carbon-by-weight-in-addition/ I see that your e-cat devices are using water to collect and transfer the heat generated. Is there a published operating temperature limit? http://faq.ecat.com/113104/i-see-that-your-e-cat-devices-are-using-water-to-collect-and-transfer-the-heat-generated-is-there-a/ Fri, 25 Nov 2011 05:32:39 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113104/i-see-that-your-e-cat-devices-are-using-water-to-collect-and-transfer-the-heat-generated-is-there-a/ In the system featured by NyTeknik (very impressive by the way), is all the liquid water coming out from the system condensed steam that has cooled down while traveling down the tube? If so, the output energy is on the high side of Nyteknik's estimates. http://faq.ecat.com/113103/in-the-system-featured-by-nyteknik-very-impressive-by-the-way-is-all-the-liquid-water-coming-out-from/ Fri, 25 Nov 2011 05:31:32 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113103/in-the-system-featured-by-nyteknik-very-impressive-by-the-way-is-all-the-liquid-water-coming-out-from/ Will the self sustaining home or domestic units have to utilize an input every 30 minutes, or will they be able to run continually without input? http://faq.ecat.com/113102/will-the-self-sustaining-home-or-domestic-units-have-to-utilize-an-input-every-30-minutes-or-will-they/ Fri, 25 Nov 2011 05:30:38 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113102/will-the-self-sustaining-home-or-domestic-units-have-to-utilize-an-input-every-30-minutes-or-will-they/ Will the home or domestic units you mention utilize the same reactor cores as the units in the one megawatt system? http://faq.ecat.com/113101/will-the-home-or-domestic-units-you-mention-utilize-the-same-reactor-cores-as-the-units-in-the-one-megawatt/ Fri, 25 Nov 2011 05:29:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113101/will-the-home-or-domestic-units-you-mention-utilize-the-same-reactor-cores-as-the-units-in-the-one-megawatt/ Could you please inform us as to the reactor core volume of the new E-Cat modules? Have they increased in size from 50 cubic centimeter modules? If so, what is their size and volume? http://faq.ecat.com/113100/could-you-please-inform-us-as-to-the-reactor-core-volume-of-the-new-e-cat-modules-have-they-increased/ Fri, 25 Nov 2011 05:29:24 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113100/could-you-please-inform-us-as-to-the-reactor-core-volume-of-the-new-e-cat-modules-have-they-increased/ Would it not be also beneficial to utilize existing coal plants? They still generate steam, correct? http://faq.ecat.com/113099/would-it-not-be-also-beneficial-to-utilize-existing-coal-plants/ Fri, 25 Nov 2011 05:20:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113099/would-it-not-be-also-beneficial-to-utilize-existing-coal-plants/ Maybe in the future your Ni-H reaction could replace the rods with Uranium in today's nuclear plants with only that change. It would save a LOT of money if it would be possible to use what is already built. Is the effect of your reaction big enough for that replacement? http://faq.ecat.com/113098/maybe-in-the-future-your-ni-h-reaction-could-replace-the-rods-with-uranium-in-todays-nuclear-plants/ Fri, 25 Nov 2011 05:19:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113098/maybe-in-the-future-your-ni-h-reaction-could-replace-the-rods-with-uranium-in-todays-nuclear-plants/ I was thinking if the core is so small for every individual E-cat how big a 1MW has to be actually? http://faq.ecat.com/113097/i-was-thinking-if-the-core-is-so-small-for-every-individual-e-cat-how-big-a-1mw-has-to-be-actually/ Fri, 25 Nov 2011 05:17:57 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113097/i-was-thinking-if-the-core-is-so-small-for-every-individual-e-cat-how-big-a-1mw-has-to-be-actually/ Is it one pipe of water for each E-cat in the 1MW? http://faq.ecat.com/113096/is-it-one-pipe-of-water-for-each-e-cat-in-the-1mw/ Fri, 25 Nov 2011 05:17:11 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113096/is-it-one-pipe-of-water-for-each-e-cat-in-the-1mw/ When you put together the 1MW doesnt the summed up heat from all the modules overheat some components in the E-cat? http://faq.ecat.com/113095/when-you-put-together-the-1mw-doesnt-the-summed-up-heat-from-all-the-modules-overheat-some-components/ Fri, 25 Nov 2011 05:16:31 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113095/when-you-put-together-the-1mw-doesnt-the-summed-up-heat-from-all-the-modules-overheat-some-components/ Can you put together how many small 5kW modules as you like? http://faq.ecat.com/113094/can-you-put-together-how-many-small-5kw-modules-as-you-like/ Fri, 25 Nov 2011 05:15:43 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113094/can-you-put-together-how-many-small-5kw-modules-as-you-like/ What was the main reason that you have succeeded with your E-CAT and main-line science failed? http://faq.ecat.com/113093/what-was-the-main-reason-that-you-have-succeeded-with-your-e-cat-and-main-line-science-failed/ Fri, 25 Nov 2011 05:14:35 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113093/what-was-the-main-reason-that-you-have-succeeded-with-your-e-cat-and-main-line-science-failed/ Is there any way one or more of us without academic credentials or vast investment capital could be allowed to be present at the first public presentation of the 1mw generator? http://faq.ecat.com/113092/is-there-any-way-one-or-more-of-us-without-academic-credentials-or-vast-investment-capital-could-be-allowed/ Fri, 25 Nov 2011 05:13:22 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113092/is-there-any-way-one-or-more-of-us-without-academic-credentials-or-vast-investment-capital-could-be-allowed/ Does it mean you dont have to refill the e-cat for 6 months? http://faq.ecat.com/113091/does-it-mean-you-dont-have-to-refill-the-e-cat-for-6-months/ Fri, 25 Nov 2011 05:11:17 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113091/does-it-mean-you-dont-have-to-refill-the-e-cat-for-6-months/ I was wondering if you may inform us as to the amount of Hydrogen that will be required to run an ECat.For home units that run for 6 months before new Nickle is added, how much Hydrogen must be supplied in the same time. If it gets too large, there may be regulatory issues? http://faq.ecat.com/113090/i-was-wondering-if-you-may-inform-us-as-to-the-amount-of-hydrogen-that-will-be-required-to-run-an-ecatfor/ Fri, 25 Nov 2011 05:05:33 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113090/i-was-wondering-if-you-may-inform-us-as-to-the-amount-of-hydrogen-that-will-be-required-to-run-an-ecatfor/ Is a thermal output ratio of 6:1 still a valid estimate (there have been different ratios discussed). Assuming a 6:1 ratio, could one e-cat drive 6 other e-cats (thermal) which drives 36 e-cats (thermal) which are then used for production of electricity? http://faq.ecat.com/113089/is-a-thermal-output-ratio-of-61-still-a-valid-estimate-there-have-been-different-ratios-discussed/ Fri, 25 Nov 2011 05:04:00 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113089/is-a-thermal-output-ratio-of-61-still-a-valid-estimate-there-have-been-different-ratios-discussed/ Are your E-cat units rated at 30kW each? Will it still be a 20ft container with units connected in parallel? If so, how many E-Cat units will there be? At what power rating per unit? What will the total HEAT output be if it is not 3.45 MW? http://faq.ecat.com/113086/are-your-e-cat-units-rated-at-30kw-each-will-it-still-be-a-20ft-container-with-units-connected-in-parallel/ Fri, 25 Nov 2011 04:57:06 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113086/are-your-e-cat-units-rated-at-30kw-each-will-it-still-be-a-20ft-container-with-units-connected-in-parallel/ I'm very excited about the technology and what it offers mankind, but I worry about the US Patent situation, protection is essential for survival long term. Is there anything you can report in this area? http://faq.ecat.com/113085/im-very-excited-about-the-technology-and-what-it-offers-mankind-but-i-worry-about-the-us-patent-situation/ Fri, 25 Nov 2011 04:54:04 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113085/im-very-excited-about-the-technology-and-what-it-offers-mankind-but-i-worry-about-the-us-patent-situation/ Do you planning to make the 1MW totally selfsustaining? http://faq.ecat.com/113084/do-you-planning-to-make-the-1mw-totally-selfsustaining/ Fri, 25 Nov 2011 04:53:05 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113084/do-you-planning-to-make-the-1mw-totally-selfsustaining/ I read in a blog of your competitors that there are methodology flaws in your testing setup, in particular, there is no proof that all the water has been converted to steam because the output hose attached to the chimney may drain even hot liquid water to the sink. He also claims that the steam speed in output from the device should be much higher (something between 67 and 137 mph) if all the water were vaporized. Could you please reply to this points? http://faq.ecat.com/113083/i-read-in-a-blog-of-your-competitors-that-there-are-methodology-flaws-in-your-testing-setup-in-particular/ Fri, 25 Nov 2011 04:51:28 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113083/i-read-in-a-blog-of-your-competitors-that-there-are-methodology-flaws-in-your-testing-setup-in-particular/ It is my understanding that Leonardo Corp. (in Miami) is and will be the sole producer of the kernel (the actual reactor chamber) for the e-cat module and other will integrate them in e-cats and actual power generator sets. In a way, the Leonardo Corp. Will act like Intel. They make CPU for computer developed and assembled by others. You will build the kernel of the e-cat and do the R&D for the future improved versions and others will assemble the final products delivered to the end users right? http://faq.ecat.com/113082/it-is-my-understanding-that-leonardo-corp-in-miami-is-and-will-be-the-sole-producer-of-the-kernel/ Fri, 25 Nov 2011 04:50:21 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113082/it-is-my-understanding-that-leonardo-corp-in-miami-is-and-will-be-the-sole-producer-of-the-kernel/ Do you think next year in Italy it will possible to sell the e-cat device to Italian Family? http://faq.ecat.com/113080/do-you-think-next-year-in-italy-it-will-possible-to-sell-the-e-cat-device-to-italian-family/ Fri, 25 Nov 2011 04:37:43 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113080/do-you-think-next-year-in-italy-it-will-possible-to-sell-the-e-cat-device-to-italian-family/ I agree with you about possibility of patent problems if it's based on nature laws. I think also that maybe was better for Rossi declare on patent the name of catalyst. What would happen if tomorrow another company deposited a similar patent but writing clear catalyst name ? http://faq.ecat.com/113079/i-agree-with-you-about-possibility-of-patent-problems-if-its-based-on-nature-laws-i-think-also-that/ Fri, 25 Nov 2011 04:36:46 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113079/i-agree-with-you-about-possibility-of-patent-problems-if-its-based-on-nature-laws-i-think-also-that/ When the world class scientists performs their test in October, will they also have a smaller e-Cat module to test? http://faq.ecat.com/113078/when-the-world-class-scientists-performs-their-test-in-october-will-they-also-have-a-smaller-e-cat-module/ Fri, 25 Nov 2011 04:35:31 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113078/when-the-world-class-scientists-performs-their-test-in-october-will-they-also-have-a-smaller-e-cat-module/ Don't you think that only starting the research at University of Bologna will be considered an extraordinary evidence? http://faq.ecat.com/113077/dont-you-think-that-only-starting-the-research-at-university-of-bologna-will-be-considered-an-extraordinary/ Fri, 25 Nov 2011 04:34:26 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113077/dont-you-think-that-only-starting-the-research-at-university-of-bologna-will-be-considered-an-extraordinary/ If you run an E-cat at, say, 10% of the rated power, does it then last 10 times longer? Are there any known aging processes of the fuel powder that might set a maximum time limit for operation? http://faq.ecat.com/113076/if-you-run-an-e-cat-at-say-10-of-the-rated-power-does-it-then-last-10-times-longer/ Fri, 25 Nov 2011 04:26:56 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113076/if-you-run-an-e-cat-at-say-10-of-the-rated-power-does-it-then-last-10-times-longer/ Desalination seems to be a perfect match for the E-Cat. First, do you agree it is a good match? Second, if yes, are you or any of your employees pursuing desalination? http://faq.ecat.com/113075/desalination-seems-to-be-a-perfect-match-for-the-e-cat-first-do-you-agree-it-is-a-good-match/ Fri, 25 Nov 2011 04:25:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113075/desalination-seems-to-be-a-perfect-match-for-the-e-cat-first-do-you-agree-it-is-a-good-match/ When do you think will the R&D with Bologna University start? http://faq.ecat.com/113074/when-do-you-think-will-the-rd-with-bologna-university-start/ Fri, 25 Nov 2011 04:23:44 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113074/when-do-you-think-will-the-rd-with-bologna-university-start/ The most recent questions posed by the scientific community about your calculations of power output, based on dry steam vs wet steam have me a little concerned. Can you comment on this for me? http://faq.ecat.com/113073/the-most-recent-questions-posed-by-the-scientific-community-about-your-calculations-of-power-output/ Fri, 25 Nov 2011 04:16:24 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113073/the-most-recent-questions-posed-by-the-scientific-community-about-your-calculations-of-power-output/ Do you think this technology would one day be scalable to the size of existing conventional nuclear reactors? http://faq.ecat.com/113072/do-you-think-this-technology-would-one-day-be-scalable-to-the-size-of-existing-conventional-nuclear-reactors/ Fri, 25 Nov 2011 04:14:16 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113072/do-you-think-this-technology-would-one-day-be-scalable-to-the-size-of-existing-conventional-nuclear-reactors/ Do you have an idea which percentage of the total needed energy in the world can be gained with e-cats? http://faq.ecat.com/113071/do-you-have-an-idea-which-percentage-of-the-total-needed-energy-in-the-world-can-be-gained-with-e-cats/ Fri, 25 Nov 2011 04:07:29 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113071/do-you-have-an-idea-which-percentage-of-the-total-needed-energy-in-the-world-can-be-gained-with-e-cats/ What percentage of scientists in the World, whose area of research should include Cold Fusion do you think are competent to be in the positions that they hold? http://faq.ecat.com/113070/what-percentage-of-scientists-in-the-world-whose-area-of-research-should-include-cold-fusion-do-you/ Fri, 25 Nov 2011 04:06:01 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113070/what-percentage-of-scientists-in-the-world-whose-area-of-research-should-include-cold-fusion-do-you/ Have you considered to give the input energy to e-cats with a hot fluid instead of electrical resistance? http://faq.ecat.com/113069/have-you-considered-to-give-the-input-energy-to-e-cats-with-a-hot-fluid-instead-of-electrical-resistance/ Fri, 25 Nov 2011 04:05:02 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113069/have-you-considered-to-give-the-input-energy-to-e-cats-with-a-hot-fluid-instead-of-electrical-resistance/ I would think this device might be good for hot water and experimental purposes, but for hot high pressure steam another design would be needed and possibly a steam engine-engineer would be needed to improve the design for this purpose? http://faq.ecat.com/113067/i-would-think-this-device-might-be-good-for-hot-water-and-experimental-purposes-but-for-hot-high-pressure/ Fri, 25 Nov 2011 04:01:28 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113067/i-would-think-this-device-might-be-good-for-hot-water-and-experimental-purposes-but-for-hot-high-pressure/ You stated that you have stable operation without external drive, up to about 100 degrees and that over 200 degrees you have stability problems. Could this be due the phase change of the water? If so, have you tried other liquids with higher boiling point such mineral oils (perharps in closed loop), to see if you get better stability? http://faq.ecat.com/113065/you-stated-that-you-have-stable-operation-without-external-drive-up-to-about-100-degrees-and-that-over/ Fri, 25 Nov 2011 03:58:28 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113065/you-stated-that-you-have-stable-operation-without-external-drive-up-to-about-100-degrees-and-that-over/ Ready to produce cold? http://faq.ecat.com/113064/ready-to-produce-cold/ Fri, 25 Nov 2011 03:53:32 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113064/ready-to-produce-cold/ I believe I've read the e-cat has been operated at up to 414C and up to either 15KWth or 35KWth but that the first generation e-cats available to the public will be lower temperature, lower output. Is it safe to assume the publicly available e-cat temperature and output will ramp up fairly quickly as they enter the market in larger numbers? Is similarly safe to assume that e-cats integrated into systems by licensees will operate at higher power levels? http://faq.ecat.com/113063/i-believe-ive-read-the-e-cat-has-been-operated-at-up-to-414c-and-up-to-either-15kwth-or-35kwth-but-that/ Fri, 25 Nov 2011 03:52:29 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113063/i-believe-ive-read-the-e-cat-has-been-operated-at-up-to-414c-and-up-to-either-15kwth-or-35kwth-but-that/ You write about 20Yr warranty, but does that take into account the natural degeneration of the regulation system? Or do the "regulating electronics" replace with the charges ? http://faq.ecat.com/113062/you-write-about-20yr-warranty-but-does-that-take-into-account-the-natural-degeneration-of-the-regulation/ Fri, 25 Nov 2011 03:51:02 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113062/you-write-about-20yr-warranty-but-does-that-take-into-account-the-natural-degeneration-of-the-regulation/ If there is still an issue with driving a turbine off the thing- why not use the available heat exchange stirling engine technology- the so called "wobble drive" from the Whispergen boiler would be perfect if the steam produced being made to do useful "work" -the whispergen produces 1kw of electricity and 6kw of heat from a gas boiler? This would enable production of a chp version of this miracle reactor? Surely this non pressure reliant tech could be integrated and the heat exchange cycle facto http://faq.ecat.com/113061/if-there-is-still-an-issue-with-driving-a-turbine-off-the-thing-why-not-use-the-available-heat-exchange/ Fri, 25 Nov 2011 03:47:49 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113061/if-there-is-still-an-issue-with-driving-a-turbine-off-the-thing-why-not-use-the-available-heat-exchange/ What is the output gain of energy in so that the e-cat can be profitable in making electrical energy? 10X, 15X? http://faq.ecat.com/113060/what-is-the-output-gain-of-energy-in-so-that-the-e-cat-can-be-profitable-in-making-electrical-energy/ Fri, 25 Nov 2011 03:46:20 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113060/what-is-the-output-gain-of-energy-in-so-that-the-e-cat-can-be-profitable-in-making-electrical-energy/ I think future is not in big power plants but in to put energy source directly inside all devices. For that i hope you get the intuition for the next step of your research? http://faq.ecat.com/113059/i-think-future-is-not-in-big-power-plants-but-in-to-put-energy-source-directly-inside-all-devices-for/ Fri, 25 Nov 2011 03:45:00 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113059/i-think-future-is-not-in-big-power-plants-but-in-to-put-energy-source-directly-inside-all-devices-for/ How much heat of the reactor is absorbed by the water and how much is absorbed by the solid parts of the e-cat? http://faq.ecat.com/113058/how-much-heat-of-the-reactor-is-absorbed-by-the-water-and-how-much-is-absorbed-by-the-solid-parts-of/ Fri, 25 Nov 2011 03:41:57 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113058/how-much-heat-of-the-reactor-is-absorbed-by-the-water-and-how-much-is-absorbed-by-the-solid-parts-of/ Could people who live in remote areas have spare recharges for your E-Cat to fit themselves or would an engineer from the company always have to change them? http://faq.ecat.com/113057/could-people-who-live-in-remote-areas-have-spare-recharges-for-your-e-cat-to-fit-themselves-or-would/ Fri, 25 Nov 2011 03:39:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113057/could-people-who-live-in-remote-areas-have-spare-recharges-for-your-e-cat-to-fit-themselves-or-would/ If your E-Cat can change Nickel into Copper can it change Iridium into Platinum through the same process? http://faq.ecat.com/113056/if-your-e-cat-can-change-nickel-into-copper-can-it-change-iridium-into-platinum-through-the-same-process/ Fri, 25 Nov 2011 03:35:20 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113056/if-your-e-cat-can-change-nickel-into-copper-can-it-change-iridium-into-platinum-through-the-same-process/ You have quoted a capital cost of Euro 2000 / kW(electrical) installed generating capacity. Over, say, a five year payback and a 50% utilisation, this would give a finance cost of about 12 cents / kW-hr energy cost, which is not competitive with coal-fired generation at 6-8 cents / kW-hr. Do you expect the cost of your units to fall significantly as production ramps up? http://faq.ecat.com/113055/you-have-quoted-a-capital-cost-of-euro-2000-kwelectrical-installed-generating-capacity-over-say/ Fri, 25 Nov 2011 03:34:11 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113055/you-have-quoted-a-capital-cost-of-euro-2000-kwelectrical-installed-generating-capacity-over-say/ In your opinion, is this Nickel + H a lucky case? In other words, do you think that there are other metallic elements that could show the same type of reaction with hydrogen (at for example higher temperature)? Did you make any experiments? Can we expect even higher energy density? http://faq.ecat.com/113054/in-your-opinion-is-this-nickel-h-a-lucky-case-in-other-words-do-you-think-that-there-are-other-metallic/ Fri, 25 Nov 2011 03:32:49 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113054/in-your-opinion-is-this-nickel-h-a-lucky-case-in-other-words-do-you-think-that-there-are-other-metallic/ Can you increase the power output of the small e-cat device above 150kW? I have read somewhere that you can generate much more than the standard few kW by playing with the catalyzer (quantity?) but that the reaction is less stable. Why is the reaction less controllable? Could it be somehow related to the size of the e-cat? http://faq.ecat.com/113053/can-you-increase-the-power-output-of-the-small-e-cat-device-above-150kw-i-have-read-somewhere-that-you/ Fri, 25 Nov 2011 03:31:38 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/113053/can-you-increase-the-power-output-of-the-small-e-cat-device-above-150kw-i-have-read-somewhere-that-you/ You've specified "300 kW, 200 °C". 200 °C is low for efficient steam-turbine operation (though geothermal stations work with it). On the other hand, I believe you have quoted 414 °C as the greatest steam temperature you have attained. Raising steam temperature to perhaps 350 °C would make a big difference, in particular in size / bulk of the plant. Is this possible? http://faq.ecat.com/112699/youve-specified-300-kw-200-c-200-c-is-low-for-efficient-steam-turbine-operation-though-geothermal/ Fri, 18 Nov 2011 14:00:46 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112699/youve-specified-300-kw-200-c-200-c-is-low-for-efficient-steam-turbine-operation-though-geothermal/ With the completion of the 1MW power plant you will instantly become a celebrity. Do you think this will force the scientific community to look into your other ground-breaking inventions: Like to one which turns waste into oil? http://faq.ecat.com/112698/with-the-completion-of-the-1mw-power-plant-you-will-instantly-become-a-celebrity-do-you-think-this-will/ Fri, 18 Nov 2011 13:58:50 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112698/with-the-completion-of-the-1mw-power-plant-you-will-instantly-become-a-celebrity-do-you-think-this-will/ What temperature and PSI would the generator be designed to receive? http://faq.ecat.com/112696/what-temperature-and-psi-would-the-generator-be-designed-to-receive/ Fri, 18 Nov 2011 13:56:24 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112696/what-temperature-and-psi-would-the-generator-be-designed-to-receive/ How many Modules ( or KW ) per generator? http://faq.ecat.com/112695/how-many-modules-or-kw-per-generator/ Fri, 18 Nov 2011 13:55:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112695/how-many-modules-or-kw-per-generator/ How long will it take for bigger plants (1MW or more) to produce electricity? http://faq.ecat.com/112694/how-long-will-it-take-for-bigger-plants-1mw-or-more-to-produce-electricity/ Fri, 18 Nov 2011 13:54:51 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112694/how-long-will-it-take-for-bigger-plants-1mw-or-more-to-produce-electricity/ How long do you think it will take to have a small e-cat (in the range of 5-30 KW) producing electricity? http://faq.ecat.com/112693/how-long-do-you-think-it-will-take-to-have-a-small-e-cat-in-the-range-of-5-30-kw-producing-electricity/ Fri, 18 Nov 2011 13:54:01 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112693/how-long-do-you-think-it-will-take-to-have-a-small-e-cat-in-the-range-of-5-30-kw-producing-electricity/ About how much energy is required for processing your fuel and catalysts for these reactors? http://faq.ecat.com/112691/about-how-much-energy-is-required-for-processing-your-fuel-and-catalysts-for-these-reactors/ Fri, 18 Nov 2011 13:11:08 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112691/about-how-much-energy-is-required-for-processing-your-fuel-and-catalysts-for-these-reactors/ How much input power you are feeding to the 1MW system? http://faq.ecat.com/112690/how-much-input-power-you-are-feeding-to-the-1mw-system/ Fri, 18 Nov 2011 13:09:45 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112690/how-much-input-power-you-are-feeding-to-the-1mw-system/ In one of your replies you indicates that the 1 MW plant actually have a 1.200.000 W capacity (300 x 4 kw = 1,2 MV). But that approx 20% of the 300 units is down for maintenance or kept as a backup. How many maintenance hours does one (1) 1 MW unit requires on a yearly basis for maintenance and reloading? http://faq.ecat.com/112689/in-one-of-your-replies-you-indicates-that-the-1-mw-plant-actually-have-a-1200000-w-capacity-300-x/ Fri, 18 Nov 2011 13:08:37 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112689/in-one-of-your-replies-you-indicates-that-the-1-mw-plant-actually-have-a-1200000-w-capacity-300-x/ How much of the output energy is used to generate electricity? Because of the carnot cycle, it cannot be 100%, so, more than 700W of the output energy must be used for a 4-5KW e-cat. http://faq.ecat.com/112688/how-much-of-the-output-energy-is-used-to-generate-electricity/ Fri, 18 Nov 2011 13:06:24 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112688/how-much-of-the-output-energy-is-used-to-generate-electricity/ Besides the peristaltic pump is any other significant source of noise in the e-cat system? http://faq.ecat.com/112687/besides-the-peristaltic-pump-is-any-other-significant-source-of-noise-in-the-e-cat-system/ Fri, 18 Nov 2011 13:04:38 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112687/besides-the-peristaltic-pump-is-any-other-significant-source-of-noise-in-the-e-cat-system/ What is the total power of the e-cat? http://faq.ecat.com/112686/what-is-the-total-power-of-the-e-cat/ Fri, 18 Nov 2011 12:59:20 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112686/what-is-the-total-power-of-the-e-cat/ What is the average positive energy of the e-cat when it is operated without an external output? http://faq.ecat.com/112685/what-is-the-average-positive-energy-of-the-e-cat-when-it-is-operated-without-an-external-output/ Fri, 18 Nov 2011 12:58:48 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112685/what-is-the-average-positive-energy-of-the-e-cat-when-it-is-operated-without-an-external-output/ I would think the reactor pressure would behave differently as a function of temperature, when the reactor is sealed versus when the reactor is connected to the hydrogen tank. Is the reactor normally sealed, then periodically opened to refresh the hydrogen? http://faq.ecat.com/112683/i-would-think-the-reactor-pressure-would-behave-differently-as-a-function-of-temperature-when-the-reactor/ Fri, 18 Nov 2011 12:41:17 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112683/i-would-think-the-reactor-pressure-would-behave-differently-as-a-function-of-temperature-when-the-reactor/ When the e-cat is running with the hydrogen line connected, is there a thermal gradient back to room temperature in the hydrogen gas from the reactor to the hydrogen line? http://faq.ecat.com/112682/when-the-e-cat-is-running-with-the-hydrogen-line-connected-is-there-a-thermal-gradient-back-to-room/ Fri, 18 Nov 2011 12:38:15 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112682/when-the-e-cat-is-running-with-the-hydrogen-line-connected-is-there-a-thermal-gradient-back-to-room/ Do you see heat loss of the reactor from the hydrogen inlet pipe? http://faq.ecat.com/112681/do-you-see-heat-loss-of-the-reactor-from-the-hydrogen-inlet-pipe/ Fri, 18 Nov 2011 12:37:25 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112681/do-you-see-heat-loss-of-the-reactor-from-the-hydrogen-inlet-pipe/ Do you think the E-Cat technology could be applied to Hydrogen fuel cells in order to produce electricity directly without the conversion to heat? I understand Hydrogen fuel cells make use of platinum powder (keeping in mind that Fleicshman-Pons style Cold Fusion makes use of Platinum), perhaps this could be replaced with Nickel. http://faq.ecat.com/112678/do-you-think-the-e-cat-technology-could-be-applied-to-hydrogen-fuel-cells-in-order-to-produce-electricity/ Fri, 18 Nov 2011 12:29:52 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112678/do-you-think-the-e-cat-technology-could-be-applied-to-hydrogen-fuel-cells-in-order-to-produce-electricity/ You mention that the heating effect is due to gamma absorption by the lead. I assume from this that the lead shielding is in fact in direct contact with the copper water jacket and so the water is heated from the outside. Is this correct? http://faq.ecat.com/112677/you-mention-that-the-heating-effect-is-due-to-gamma-absorption-by-the-lead-i-assume-from-this-that-the/ Fri, 18 Nov 2011 12:28:14 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112677/you-mention-that-the-heating-effect-is-due-to-gamma-absorption-by-the-lead-i-assume-from-this-that-the/ In a comment on his blog Daniele Passerini has revealed that you worked with Brian Ahern before 2007. Can you confirm that? If yes, what kind of work did you do with him? http://faq.ecat.com/112632/in-a-comment-on-his-blog-daniele-passerini-has-revealed-that-you-worked-with-brian-ahern-before-2007/ Thu, 17 Nov 2011 17:27:39 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112632/in-a-comment-on-his-blog-daniele-passerini-has-revealed-that-you-worked-with-brian-ahern-before-2007/ Can you say us when in your opinion might be in the market an electric converter based on E-Cat? http://faq.ecat.com/112631/can-you-say-us-when-in-your-opinion-might-be-in-the-market-an-electric-converter-based-on-e-cat/ Thu, 17 Nov 2011 17:25:40 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112631/can-you-say-us-when-in-your-opinion-might-be-in-the-market-an-electric-converter-based-on-e-cat/ In which year did your experiments first convince you that the effect was genuine? http://faq.ecat.com/112630/in-which-year-did-your-experiments-first-convince-you-that-the-effect-was-genuine/ Thu, 17 Nov 2011 17:24:22 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112630/in-which-year-did-your-experiments-first-convince-you-that-the-effect-was-genuine/ What convinced you to begin the research? http://faq.ecat.com/112629/what-convinced-you-to-begin-the-research/ Thu, 17 Nov 2011 17:23:37 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112629/what-convinced-you-to-begin-the-research/ In which year did you begin to research your E-CAT? http://faq.ecat.com/112628/in-which-year-did-you-begin-to-research-your-e-cat/ Thu, 17 Nov 2011 17:22:17 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112628/in-which-year-did-you-begin-to-research-your-e-cat/ In a interview with Mr. Levi where he mentioned he unplugged the electrical power during a test (in january if I'm right). He said that you told him not to cut the power suddenly, it could turn the system unstable. Is it something that will be addressed in the future? http://faq.ecat.com/112627/in-a-interview-with-mr-levi-where-he-mentioned-he-unplugged-the-electrical-power-during-a-test-in-january/ Thu, 17 Nov 2011 17:21:20 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112627/in-a-interview-with-mr-levi-where-he-mentioned-he-unplugged-the-electrical-power-during-a-test-in-january/ What do you think what is most suitable stock for hydrogen production : Gas, methanol , water or something new stock? http://faq.ecat.com/112626/what-do-you-think-what-is-most-suitable-stock-for-hydrogen-production-gas-methanol-water-or-something/ Thu, 17 Nov 2011 17:06:56 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112626/what-do-you-think-what-is-most-suitable-stock-for-hydrogen-production-gas-methanol-water-or-something/ Do you plan to produce Hydrogen for Ecat reaction on power plant or are You going to buy it from another supplier? http://faq.ecat.com/112625/do-you-plan-to-produce-hydrogen-for-ecat-reaction-on-power-plant-or-are-you-going-to-buy-it-from-another/ Thu, 17 Nov 2011 17:05:53 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112625/do-you-plan-to-produce-hydrogen-for-ecat-reaction-on-power-plant-or-are-you-going-to-buy-it-from-another/ What OU ratio do you predict the 1MW plant will operate at? 6:1, 8:1, or perhaps even more? http://faq.ecat.com/112623/what-ou-ratio-do-you-predict-the-1mw-plant-will-operate-at/ Thu, 17 Nov 2011 16:40:19 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112623/what-ou-ratio-do-you-predict-the-1mw-plant-will-operate-at/ Is your proprietary technology the only cold fusion system in the works that doesn't utilize heavy water? http://faq.ecat.com/112622/is-your-proprietary-technology-the-only-cold-fusion-system-in-the-works-that-doesnt-utilize-heavy-water/ Thu, 17 Nov 2011 16:39:30 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112622/is-your-proprietary-technology-the-only-cold-fusion-system-in-the-works-that-doesnt-utilize-heavy-water/ Please send me an autographed copy of your new book, The history and story of the E-CAT? http://faq.ecat.com/112621/please-send-me-an-autographed-copy-of-your-new-book-the-history-and-story-of-the-e-cat/ Thu, 17 Nov 2011 16:36:15 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112621/please-send-me-an-autographed-copy-of-your-new-book-the-history-and-story-of-the-e-cat/ Do you think the e-CAT could be used for heating several greenhouses during winter? And quarters composed by several apartment buildings? http://faq.ecat.com/112620/do-you-think-the-e-cat-could-be-used-for-heating-several-greenhouses-during-winter/ Thu, 17 Nov 2011 16:31:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112620/do-you-think-the-e-cat-could-be-used-for-heating-several-greenhouses-during-winter/ Have you make a measurement without nickel in your reactor (only Hydrogen and resistor)? http://faq.ecat.com/112619/have-you-make-a-measurement-without-nickel-in-your-reactor-only-hydrogen-and-resistor/ Thu, 17 Nov 2011 16:31:00 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112619/have-you-make-a-measurement-without-nickel-in-your-reactor-only-hydrogen-and-resistor/ Are you a christian, and what are your thoughts concerning the Bible? http://faq.ecat.com/112618/are-you-a-christian-and-what-are-your-thoughts-concerning-the-bible/ Thu, 17 Nov 2011 16:29:34 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112618/are-you-a-christian-and-what-are-your-thoughts-concerning-the-bible/ When the temp inside the reactor is 1500 celsius degrees the nickel melts down is that "boosting" the effect? http://faq.ecat.com/112617/when-the-temp-inside-the-reactor-is-1500-celsius-degrees-the-nickel-melts-down-is-that-boosting-the/ Thu, 17 Nov 2011 16:27:03 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112617/when-the-temp-inside-the-reactor-is-1500-celsius-degrees-the-nickel-melts-down-is-that-boosting-the/ As the expected results of your E-Cat device are quite promising, won't it be a great idea to start investing in nickel based companies? http://faq.ecat.com/112616/as-the-expected-results-of-your-e-cat-device-are-quite-promising-wont-it-be-a-great-idea-to-start-investing/ Thu, 17 Nov 2011 16:25:10 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112616/as-the-expected-results-of-your-e-cat-device-are-quite-promising-wont-it-be-a-great-idea-to-start-investing/ How big is the reaction chamber of the new E-Cat with which you say it is possible to produce 27kW of thermal energy when putting in 2.5kW? The size for earlier versions was 50ccm (2.5kW e-cat). http://faq.ecat.com/112615/how-big-is-the-reaction-chamber-of-the-new-e-cat-with-which-you-say-it-is-possible-to-produce-27kw-of/ Thu, 17 Nov 2011 16:16:21 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112615/how-big-is-the-reaction-chamber-of-the-new-e-cat-with-which-you-say-it-is-possible-to-produce-27kw-of/ Do you think the older power plant could be converted for using e-CATs? http://faq.ecat.com/112613/do-you-think-the-older-power-plant-could-be-converted-for-using-e-cats/ Thu, 17 Nov 2011 16:14:03 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112613/do-you-think-the-older-power-plant-could-be-converted-for-using-e-cats/ Do the 1 MW Power Station only produce Thermal Energy and 1 year later also Electrical? http://faq.ecat.com/112612/do-the-1-mw-power-station-only-produce-thermal-energy-and-1-year-later-also-electrical/ Thu, 17 Nov 2011 16:11:54 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112612/do-the-1-mw-power-station-only-produce-thermal-energy-and-1-year-later-also-electrical/ It would appear from photos that you are currently wrapping the lead shielding over the insulation? http://faq.ecat.com/112611/it-would-appear-from-photos-that-you-are-currently-wrapping-the-lead-shielding-over-the-insulation/ Thu, 17 Nov 2011 16:09:37 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112611/it-would-appear-from-photos-that-you-are-currently-wrapping-the-lead-shielding-over-the-insulation/ I have some questions about the heat unit : If there is real a input/output ratio of 400W/12400W for the commercial variant of the reactor; if the reactor work in houses like central heating unit; in what output domains will be made the reactors? http://faq.ecat.com/112610/i-have-some-questions-about-the-heat-unit-if-there-is-real-a-inputoutput-ratio-of-400w12400w-for/ Thu, 17 Nov 2011 16:04:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112610/i-have-some-questions-about-the-heat-unit-if-there-is-real-a-inputoutput-ratio-of-400w12400w-for/ What sort of radiation can potentially leak out of the device if, for example, certain of the lead casings that house each core reactor unit get broken or are accidentally opened while the device is running? http://faq.ecat.com/112609/what-sort-of-radiation-can-potentially-leak-out-of-the-device-if-for-example-certain-of-the-lead-casings/ Thu, 17 Nov 2011 15:56:27 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112609/what-sort-of-radiation-can-potentially-leak-out-of-the-device-if-for-example-certain-of-the-lead-casings/ What are the potential dangers of using your technology? I assume there are some risks with respect to the device becoming unstable, based on your prior comments about doing certain things (such as using external power from time to time, and running the devices well below their maximum capacity) for the sake of stability. What happens if stability is lost? What are the worst-case-scenario risks? http://faq.ecat.com/112608/what-are-the-potential-dangers-of-using-your-technology-i-assume-there-are-some-risks-with-respect-to/ Thu, 17 Nov 2011 15:55:21 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112608/what-are-the-potential-dangers-of-using-your-technology-i-assume-there-are-some-risks-with-respect-to/ Now that you understand what's happening in your e-cat, is Cold Fusion or LENR the most appropriate definition? http://faq.ecat.com/112607/now-that-you-understand-whats-happening-in-your-e-cat-is-cold-fusion-or-lenr-the-most-appropriate-definition/ Thu, 17 Nov 2011 15:47:29 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112607/now-that-you-understand-whats-happening-in-your-e-cat-is-cold-fusion-or-lenr-the-most-appropriate-definition/ My question is about the E-Cat maintenance once bought and used by a domestic customer, for house. Is there any kind of measurement, monitoring or maintenance? If so, what are the regularity of these maintenance. What could happen if no maintenance are done? Etc.. http://faq.ecat.com/112606/my-question-is-about-the-e-cat-maintenance-once-bought-and-used-by-a-domestic-customer-for-house-is/ Thu, 17 Nov 2011 15:43:43 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112606/my-question-is-about-the-e-cat-maintenance-once-bought-and-used-by-a-domestic-customer-for-house-is/ For 1 MW delivered continuously for 6 months (the upcoming test), how much does the "fuel" costs? http://faq.ecat.com/112605/for-1-mw-delivered-continuously-for-6-months-the-upcoming-test-how-much-does-the-fuel-costs/ Thu, 17 Nov 2011 15:38:48 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112605/for-1-mw-delivered-continuously-for-6-months-the-upcoming-test-how-much-does-the-fuel-costs/ We have gone from a 30 kg ecat generating 12 kW power, to an 80 kg ecat generating 3 kW of power. Ten times less power density. Can you explain this? http://faq.ecat.com/112604/we-have-gone-from-a-30-kg-ecat-generating-12-kw-power-to-an-80-kg-ecat-generating-3-kw-of-power-ten/ Thu, 17 Nov 2011 15:35:50 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112604/we-have-gone-from-a-30-kg-ecat-generating-12-kw-power-to-an-80-kg-ecat-generating-3-kw-of-power-ten/ I did read from reports that the energy gain was between 3:1 and 6:1. That was because the startup period was correctly accounted in. I understand that for the reactor stabilization it's better to heat up (or mix the powder?) the core every some time. My question to you is: After the startup, in a regular usage what is the energy gain along the typical 24 hours all including? http://faq.ecat.com/112603/i-did-read-from-reports-that-the-energy-gain-was-between-31-and-61-that-was-because-the-startup-period/ Thu, 17 Nov 2011 15:32:23 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112603/i-did-read-from-reports-that-the-energy-gain-was-between-31-and-61-that-was-because-the-startup-period/ If selling price is planned for 500 Euros per 1 kW of output capability, this is 5.000 Euros for 10 kW home general purpose devices. For period of 1 winter season this device is capable save around 1.000 Euros of costs for coal/gas/electricity (at tasks as heating water and heating home). Economic amortization is thus around 5 years? http://faq.ecat.com/112602/if-selling-price-is-planned-for-500-euros-per-1-kw-of-output-capability-this-is-5000-euros-for-10-kw/ Thu, 17 Nov 2011 15:29:58 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112602/if-selling-price-is-planned-for-500-euros-per-1-kw-of-output-capability-this-is-5000-euros-for-10-kw/ You have stated the following more than once, I believe. "The drive is turned on for spots of 10 minutes, as you have read in the NyTeknik Report." So to be clear, are you stating that after the start of self sustain mode, the main drive (not just the box producing frequencies) was turned on for ten minutes, from time to time? http://faq.ecat.com/112600/you-have-stated-the-following-more-than-once-i-believe-the-drive-is-turned-on-for-spots-of-10-minutes/ Thu, 17 Nov 2011 15:26:18 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112600/you-have-stated-the-following-more-than-once-i-believe-the-drive-is-turned-on-for-spots-of-10-minutes/ How long would the device continue to generate the 3.5 kilowatts of power output without additional power input? Is it possible for the device to run in this manner until the fuel needs replacement? http://faq.ecat.com/112595/how-long-would-the-device-continue-to-generate-the-35-kilowatts-of-power-output-without-additional-power/ Thu, 17 Nov 2011 14:50:57 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112595/how-long-would-the-device-continue-to-generate-the-35-kilowatts-of-power-output-without-additional-power/ I wonder why there hasn't been put a thermocouple inside the core of reactor. I think that the measure of that temperature would be the most important of the entire test. Infact it permits to valuate the strength of reaction and watch exactly the self sustaining state. If that temperature infact remains high without electric energy in input, there is surely self sustaining. http://faq.ecat.com/112593/i-wonder-why-there-hasnt-been-put-a-thermocouple-inside-the-core-of-reactor-i-think-that-the-measure/ Thu, 17 Nov 2011 14:46:15 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112593/i-wonder-why-there-hasnt-been-put-a-thermocouple-inside-the-core-of-reactor-i-think-that-the-measure/ I'm aware that your demonstration unit required a power input of 1.3 kW for 3 hours before running in self sustaining mode, and produced 4.3kW output. What input/output do you plan to market in the commercial unit? http://faq.ecat.com/112588/im-aware-that-your-demonstration-unit-required-a-power-input-of-13-kw-for-3-hours-before-running-in/ Thu, 17 Nov 2011 14:35:11 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112588/im-aware-that-your-demonstration-unit-required-a-power-input-of-13-kw-for-3-hours-before-running-in/ In your tests with the so-called "Fat-Cat", did you manage the various cycles (switch on/off, current intensity, "frequencies") manually, or was it yet, at least partly, automated? http://faq.ecat.com/112587/in-your-tests-with-the-so-called-fat-cat-did-you-manage-the-various-cycles-switch-onoff-current/ Thu, 17 Nov 2011 14:27:39 +0000 Asked by Ecat.com 6 months ago http://faq.ecat.com/112587/in-your-tests-with-the-so-called-fat-cat-did-you-manage-the-various-cycles-switch-onoff-current/ Can the customer influence the heat-production? The demand is different during the day/week. Even when produced energy from NI/H is cheap, the electricity still costs. So it makes sense to turn it down when not needed. http://faq.ecat.com/112586/can-the-customer-influence-the-heat-production/ Thu, 17 Nov 2011 14:08:10 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112586/can-the-customer-influence-the-heat-production/ The 1 MW ECAT container is connected to a customer-provided water-circulation-system. You need to protect the delicate parts from dirt/rust etc coming with the water, presumably by filters. Where are those filters and how are they cleaned (how often, by whom)? http://faq.ecat.com/112585/the-1-mw-ecat-container-is-connected-to-a-customer-provided-water-circulation-system-you-need-to-protect/ Thu, 17 Nov 2011 14:00:14 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112585/the-1-mw-ecat-container-is-connected-to-a-customer-provided-water-circulation-system-you-need-to-protect/ It is not clear who builds the next batch of 1 MW ECAT containers. It maybe the same company or it maybe outsourced. Does the actual assembly-company run a certified ISO9000 QA-system ? Does the manufacturer of the active cells run a certified ISO9000 QA-system? http://faq.ecat.com/112584/it-is-not-clear-who-builds-the-next-batch-of-1-mw-ecat-containers-it-maybe-the-same-company-or-it-maybe/ Thu, 17 Nov 2011 13:52:04 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112584/it-is-not-clear-who-builds-the-next-batch-of-1-mw-ecat-containers-it-maybe-the-same-company-or-it-maybe/ What is the design-pressure of the water-system? Do you have a safety-valve? Where is it's outlet? http://faq.ecat.com/112583/what-is-the-design-pressure-of-the-water-system-do-you-have-a-safety-valve/ Thu, 17 Nov 2011 13:39:56 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112583/what-is-the-design-pressure-of-the-water-system-do-you-have-a-safety-valve/ Will the home e-cat be delivered to operate like a home central heating unit, such as a gas combination boiler? Will it provide heating and hot water? Will it include circulating pumps, expansion vessels, thermostats and timers? Will it be designed in such away that a relatively simple remove and replace of the current installed home gas/electric boiler can be made? Are you working with any boiler manufactures on the home e-cat design? http://faq.ecat.com/112579/will-the-home-e-cat-be-delivered-to-operate-like-a-home-central-heating-unit-such-as-a-gas-combination/ Thu, 17 Nov 2011 12:56:24 +0000 Asked by Dave 6 months ago http://faq.ecat.com/112579/will-the-home-e-cat-be-delivered-to-operate-like-a-home-central-heating-unit-such-as-a-gas-combination/ Are you still looking for design 'logo' for the e-cat or have you already finalised this? http://faq.ecat.com/112578/are-you-still-looking-for-design-logo-for-the-e-cat-or-have-you-already-finalised-this/ Thu, 17 Nov 2011 12:32:54 +0000 Asked by Nick Moore 6 months ago http://faq.ecat.com/112578/are-you-still-looking-for-design-logo-for-the-e-cat-or-have-you-already-finalised-this/ Can you confirm cost of 1m.w. Plant? Is it 2,000 000 euros or dollars? http://faq.ecat.com/112576/can-you-confirm-cost-of-1mw-plant/ Thu, 17 Nov 2011 12:31:21 +0000 Asked by Nick Moore 6 months ago http://faq.ecat.com/112576/can-you-confirm-cost-of-1mw-plant/ The technical data sheet mentions average electrical power-consumption of 167 kW. I understand, that external energy is needed to start the process; however, it is not clear why that much energy needs to be added to have an exothermic reaction going on. Can you clarify? http://faq.ecat.com/112575/the-technical-data-sheet-mentions-average-electrical-power-consumption-of-167-kw-i-understand-that/ Thu, 17 Nov 2011 12:07:58 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112575/the-technical-data-sheet-mentions-average-electrical-power-consumption-of-167-kw-i-understand-that/ Using a 1 MW ECAT container as a warm-water generator seems to be the easiest way to use it. To use it as a steam-generator requires much more know-how about water-treatment. What are the requirements (in operator qualification) to operate a 1 MW container as steam-generator? http://faq.ecat.com/112574/using-a-1-mw-ecat-container-as-a-warm-water-generator-seems-to-be-the-easiest-way-to-use-it-to-use-it/ Thu, 17 Nov 2011 11:50:13 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112574/using-a-1-mw-ecat-container-as-a-warm-water-generator-seems-to-be-the-easiest-way-to-use-it-to-use-it/ Is the water-circulation pump included? Or is it provided by customer? Are there technical precautions to prevent the system from losing all water in case of external damage? Can it be simply be filled up again or is a technician required? http://faq.ecat.com/112573/is-the-water-circulation-pump-included-or-is-it-provided-by-customer-are-there-technical-precautions/ Thu, 17 Nov 2011 11:43:45 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112573/is-the-water-circulation-pump-included-or-is-it-provided-by-customer-are-there-technical-precautions/ I miss the weight of an operational 1 MW container in the technical data sheet. It would be helpful to plan the crane/forklift for unloading and to specify the basement, where it sits on? http://faq.ecat.com/112571/i-miss-the-weight-of-an-operational-1-mw-container-in-the-technical-data-sheet-it-would-be-helpful-to/ Thu, 17 Nov 2011 11:14:44 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112571/i-miss-the-weight-of-an-operational-1-mw-container-in-the-technical-data-sheet-it-would-be-helpful-to/ Inside the active cells i assume considerable temperatures. Even when they are isolated, the emit heat to their environment, the container. Does the 1 MW container need cooling/air condition to keep internal conditions comfortable for industrial grade electronics? http://faq.ecat.com/112570/inside-the-active-cells-i-assume-considerable-temperatures-even-when-they-are-isolated-the-emit-heat/ Thu, 17 Nov 2011 11:08:50 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112570/inside-the-active-cells-i-assume-considerable-temperatures-even-when-they-are-isolated-the-emit-heat/ Hello, I would like to know what concrete costs to consider about the use of e-cat home unit? Purchase? Energy of launch? Use over time? ... ? Cordially. http://faq.ecat.com/112569/hello-i-would-like-to-know-what-concrete-costs-to-consider-about-the-use-of-e-cat-home-unit-purchase/ Thu, 17 Nov 2011 11:05:20 +0000 Asked by M.b. 6 months ago http://faq.ecat.com/112569/hello-i-would-like-to-know-what-concrete-costs-to-consider-about-the-use-of-e-cat-home-unit-purchase/ Is the name ECAT registered as a trademark ? Worldwide? http://faq.ecat.com/112567/is-the-name-ecat-registered-as-a-trademark/ Thu, 17 Nov 2011 10:54:09 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112567/is-the-name-ecat-registered-as-a-trademark/ Do you intend to exhibit ECAT on 'hannover messe 2012', one of the largest technical fairs? http://faq.ecat.com/112566/do-you-intend-to-exhibit-ecat-on-hannover-messe-2012-one-of-the-largest-technical-fairs/ Thu, 17 Nov 2011 10:51:17 +0000 Asked by Dvh 6 months ago http://faq.ecat.com/112566/do-you-intend-to-exhibit-ecat-on-hannover-messe-2012-one-of-the-largest-technical-fairs/ What is the symptom when the fuel is nearly spent? http://faq.ecat.com/112558/what-is-the-symptom-when-the-fuel-is-nearly-spent/ Thu, 17 Nov 2011 05:23:42 +0000 Asked by Jay Stewart 7 months ago http://faq.ecat.com/112558/what-is-the-symptom-when-the-fuel-is-nearly-spent/ Could you design the home e-cat so that replacing the fuel every 6 months is simply a matter of changing a cartridge? This would permit homeowners to simply swap out the part without requiring an expensive technician's visit. If there is a matter of controlling the cartridges, customers could remove the old cartridge, exchange them at a drop off point, and pick up the new one to reinstall at home. http://faq.ecat.com/112557/could-you-design-the-home-e-cat-so-that-replacing-the-fuel-every-6-months-is-simply-a-matter-of-changing/ Thu, 17 Nov 2011 05:15:02 +0000 Asked by Jim Wall 7 months ago http://faq.ecat.com/112557/could-you-design-the-home-e-cat-so-that-replacing-the-fuel-every-6-months-is-simply-a-matter-of-changing/ Will this technology ever be able to generate an electric voltage directly, as solar panels do, without having to convert from steam through a mechanical generator first? http://faq.ecat.com/112556/will-this-technology-ever-be-able-to-generate-an-electric-voltage-directly-as-solar-panels-do-without/ Thu, 17 Nov 2011 04:46:00 +0000 Asked by Jim Wall 7 months ago http://faq.ecat.com/112556/will-this-technology-ever-be-able-to-generate-an-electric-voltage-directly-as-solar-panels-do-without/ It seems that franchise offices may make sense to show, advise, install, and maintain the smaller industrial and home versions of the e-Cat. Are there plans such a franchised approach? http://faq.ecat.com/112545/it-seems-that-franchise-offices-may-make-sense-to-show-advise-install-and-maintain-the-smaller-industrial/ Thu, 17 Nov 2011 01:12:48 +0000 Asked by Steven Bryan 7 months ago http://faq.ecat.com/112545/it-seems-that-franchise-offices-may-make-sense-to-show-advise-install-and-maintain-the-smaller-industrial/ The site www.ecat.com is now saying it is "In Association with Andrea Rossi". They have an order form for E-Cats, also. Do you have an official relationship with this site? http://faq.ecat.com/112544/the-site-wwwecatcom-is-now-saying-it-is-in-association-with-andrea-rossi-they-have-an-order-form/ Wed, 16 Nov 2011 23:42:48 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112544/the-site-wwwecatcom-is-now-saying-it-is-in-association-with-andrea-rossi-they-have-an-order-form/ What is the cost, for 10Kwatt heater, of replacing the e-cat core every six months. Do you have an approximate cost? http://faq.ecat.com/112515/what-is-the-cost-for-10kwatt-heater-of-replacing-the-e-cat-core-every-six-months-do-you-have-an-approximate/ Wed, 16 Nov 2011 13:00:54 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112515/what-is-the-cost-for-10kwatt-heater-of-replacing-the-e-cat-core-every-six-months-do-you-have-an-approximate/ Does the so-called generator of frequencies to wide band, that you have turned on during the test, have a functional and essential importance or only a function "disturber" for possible unauthorized surveys of the ghost of issue of the E-Cat? http://faq.ecat.com/112514/does-the-so-called-generator-of-frequencies-to-wide-band-that-you-have-turned-on-during-the-test-have/ Wed, 16 Nov 2011 12:58:50 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112514/does-the-so-called-generator-of-frequencies-to-wide-band-that-you-have-turned-on-during-the-test-have/ For the 6 Oct test, only one of the three modules in the E-Cat was active. By what means were the other two made inoperative? They don't seem to have separate heaters or hydrogen inputs. Was the nickel powder left out of them? http://faq.ecat.com/112513/for-the-6-oct-test-only-one-of-the-three-modules-in-the-e-cat-was-active-by-what-means-were-the-other/ Wed, 16 Nov 2011 12:57:09 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112513/for-the-6-oct-test-only-one-of-the-three-modules-in-the-e-cat-was-active-by-what-means-were-the-other/ Could you tell the primary flow rate of the peristaltic pump? http://faq.ecat.com/112512/could-you-tell-the-primary-flow-rate-of-the-peristaltic-pump/ Wed, 16 Nov 2011 12:55:27 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112512/could-you-tell-the-primary-flow-rate-of-the-peristaltic-pump/ In an earlier answer you stated: "18:57 Measured outflow of primary circuit in heat exchanger, supposedly condensed steam, to be 328 g in 360 seconds, giving a flow of 0.91 g/s. Temperature 23.8 °C." This will only give you 3,3 liters/hour, is that correct? http://faq.ecat.com/112511/in-an-earlier-answer-you-stated-1857-measured-outflow-of-primary-circuit-in-heat-exchanger-supposedly/ Wed, 16 Nov 2011 12:51:56 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112511/in-an-earlier-answer-you-stated-1857-measured-outflow-of-primary-circuit-in-heat-exchanger-supposedly/ Does the timing of the heating and the frequency device fixed and the same for all E-Cats, that is, can the same pattern of heating and frequency device be applied all the time? If not, what indication do you use to decide when more heating is required or when it can be turned off? I understand that specific values might be confidential, but Is this control process simple enough that you could have instructed me what to do and then http://faq.ecat.com/112510/does-the-timing-of-the-heating-and-the-frequency-device-fixed-and-the-same-for-all-e-cats-that-is-can/ Wed, 16 Nov 2011 12:49:48 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112510/does-the-timing-of-the-heating-and-the-frequency-device-fixed-and-the-same-for-all-e-cats-that-is-can/ The test performed in Bologna october 6 was indeed impressive. However, based on the time required to attend self sustained mood, I have a question for you: According to data given by Mats Lewan in Ny Teknik it can be estimated that, if the water volume of Fat-Cat #2 had been the same as that of Fat-Cat #1, it would have taken 8.5 hours to fill up Fat-Cat #2. I must have made a mistake in my calculations. Could you please help me out here? http://faq.ecat.com/112509/the-test-performed-in-bologna-october-6-was-indeed-impressive-however-based-on-the-time-required-to/ Wed, 16 Nov 2011 12:45:50 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112509/the-test-performed-in-bologna-october-6-was-indeed-impressive-however-based-on-the-time-required-to/ I noticed the large pump you have on the exterior of the cargo container. Can it supply water flow to only a few ECATS at a time? http://faq.ecat.com/112508/i-noticed-the-large-pump-you-have-on-the-exterior-of-the-cargo-container-can-it-supply-water-flow-to/ Wed, 16 Nov 2011 12:43:38 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112508/i-noticed-the-large-pump-you-have-on-the-exterior-of-the-cargo-container-can-it-supply-water-flow-to/ Have you had the opportunity to connect several ECATS (such as 5) in parallel for a modest sized test? http://faq.ecat.com/112507/have-you-had-the-opportunity-to-connect-several-ecats-such-as-5-in-parallel-for-a-modest-sized-test/ Wed, 16 Nov 2011 12:41:19 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112507/have-you-had-the-opportunity-to-connect-several-ecats-such-as-5-in-parallel-for-a-modest-sized-test/ Is this something you are considering? If you use of molten salts, as well as in thermodynamic solar panels of the Priolo plant? They work with a system that brings out from concentrators Solar molten salts to 550 degrees and generates electricity cool that fludio to 270 degrees (steam generating) which is fed back into solar concentrators. The loss of energy due to the use of molten salts is very low. http://faq.ecat.com/112506/is-this-something-you-are-considering-if-you-use-of-molten-salts-as-well-as-in-thermodynamic-solar/ Wed, 16 Nov 2011 12:33:09 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112506/is-this-something-you-are-considering-if-you-use-of-molten-salts-as-well-as-in-thermodynamic-solar/ I have read that the output general pipe for the steam could be too small and weak. But surely your engineers have well designed all things for safety reasons? http://faq.ecat.com/112505/i-have-read-that-the-output-general-pipe-for-the-steam-could-be-too-small-and-weak-but-surely-your-engineers/ Wed, 16 Nov 2011 12:30:10 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112505/i-have-read-that-the-output-general-pipe-for-the-steam-could-be-too-small-and-weak-but-surely-your-engineers/ Have you a water tank to supply the Plant? Or the water will be get from the city water pipe? http://faq.ecat.com/112504/have-you-a-water-tank-to-supply-the-plant/ Wed, 16 Nov 2011 12:28:44 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112504/have-you-a-water-tank-to-supply-the-plant/ Can you provide this value or range of values for each commercial application? http://faq.ecat.com/112503/can-you-provide-this-value-or-range-of-values-for-each-commercial-application/ Wed, 16 Nov 2011 12:27:19 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112503/can-you-provide-this-value-or-range-of-values-for-each-commercial-application/ Will the output (temperature) be different depending on the commercial application of the E-Cat? http://faq.ecat.com/112502/will-the-output-temperature-be-different-depending-on-the-commercial-application-of-the-e-cat/ Wed, 16 Nov 2011 12:26:30 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112502/will-the-output-temperature-be-different-depending-on-the-commercial-application-of-the-e-cat/ Have you finalized the exact temperature range(s) you will use in the E-Cat commercially? http://faq.ecat.com/112501/have-you-finalized-the-exact-temperature-ranges-you-will-use-in-the-e-cat-commercially/ Wed, 16 Nov 2011 12:24:45 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112501/have-you-finalized-the-exact-temperature-ranges-you-will-use-in-the-e-cat-commercially/ Can the 1 MW e cat be modulated down to a lower level of power? Say 30%, 50%, 75%? Or would it work in a start/stop manner, that is, 0% and 100%? http://faq.ecat.com/112499/can-the-1-mw-e-cat-be-modulated-down-to-a-lower-level-of-power-say-30-50-75/ Wed, 16 Nov 2011 12:22:21 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112499/can-the-1-mw-e-cat-be-modulated-down-to-a-lower-level-of-power-say-30-50-75/ Can you tell us what's the maximum power reached and the COP obtained ? http://faq.ecat.com/112460/can-you-tell-us-whats-the-maximum-power-reached-and-the-cop-obtained/ Tue, 15 Nov 2011 14:03:02 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112460/can-you-tell-us-whats-the-maximum-power-reached-and-the-cop-obtained/ How can water reach higher temperature when it passes through more than one E-Cat module, instead of just one. Is it so that the water flows at a higher speed so it exchanges less heat with each module, but the overall flux is bigger. In this way a bigger amount of water would be heated, not a higher temperature reached? http://faq.ecat.com/112459/how-can-water-reach-higher-temperature-when-it-passes-through-more-than-one-e-cat-module-instead-of/ Tue, 15 Nov 2011 14:00:31 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112459/how-can-water-reach-higher-temperature-when-it-passes-through-more-than-one-e-cat-module-instead-of/ I would like to verify the cost-effectiveness in purchasing a 1 Mw and ecat from being installed along with a power converter (turbine steam?) to produce electricity from entering the network. http://faq.ecat.com/112458/i-would-like-to-verify-the-cost-effectiveness-in-purchasing-a-1-mw-and-ecat-from-being-installed-along/ Tue, 15 Nov 2011 13:58:11 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112458/i-would-like-to-verify-the-cost-effectiveness-in-purchasing-a-1-mw-and-ecat-from-being-installed-along/ Will your fuel mixture operate other types of reactors for example; if one was made by General Motors or John Deere or any huge American Based company? http://faq.ecat.com/112457/will-your-fuel-mixture-operate-other-types-of-reactors-for-example-if-one-was-made-by-general-motors/ Tue, 15 Nov 2011 13:55:10 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112457/will-your-fuel-mixture-operate-other-types-of-reactors-for-example-if-one-was-made-by-general-motors/ Are you providing an extended warranty for the Product. If so can you tell us what the duration of the warranty is? http://faq.ecat.com/112456/are-you-providing-an-extended-warranty-for-the-product-if-so-can-you-tell-us-what-the-duration-of-the/ Tue, 15 Nov 2011 13:50:23 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112456/are-you-providing-an-extended-warranty-for-the-product-if-so-can-you-tell-us-what-the-duration-of-the/ How quickly can you ramp up the production rate to even begin to satisfy that market? http://faq.ecat.com/112455/how-quickly-can-you-ramp-up-the-production-rate-to-even-begin-to-satisfy-that-market/ Tue, 15 Nov 2011 13:49:02 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112455/how-quickly-can-you-ramp-up-the-production-rate-to-even-begin-to-satisfy-that-market/ Has the E-Cat already been certified by obtaining the CE markings for marketing in Europe? http://faq.ecat.com/112454/has-the-e-cat-already-been-certified-by-obtaining-the-ce-markings-for-marketing-in-europe/ Tue, 15 Nov 2011 13:47:06 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112454/has-the-e-cat-already-been-certified-by-obtaining-the-ce-markings-for-marketing-in-europe/ Was the e-cat that you invented designed after you had become aware of the excess energy possible by the mixture of elements in your fuel? http://faq.ecat.com/112453/was-the-e-cat-that-you-invented-designed-after-you-had-become-aware-of-the-excess-energy-possible-by/ Tue, 15 Nov 2011 13:45:30 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112453/was-the-e-cat-that-you-invented-designed-after-you-had-become-aware-of-the-excess-energy-possible-by/ The COP of 6 you often refer to is a minimum guaranteed value for this first model designs an efficient inverter type Heat Pump today yields COP of up to 5, so 6 is really not that inspiring from a marketing point of view, did you consider this? http://faq.ecat.com/112452/the-cop-of-6-you-often-refer-to-is-a-minimum-guaranteed-value-for-this-first-model-designs-an-efficient/ Tue, 15 Nov 2011 13:44:00 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112452/the-cop-of-6-you-often-refer-to-is-a-minimum-guaranteed-value-for-this-first-model-designs-an-efficient/ Will the cost of this el-power (maximum 167 kWh for 6 months) come in addition to the cost for fuel (10 kg nickel & 18 kg hydrogen pr. 6 months)? http://faq.ecat.com/112451/will-the-cost-of-this-el-power-maximum-167-kwh-for-6-months-come-in-addition-to-the-cost-for-fuel-10/ Tue, 15 Nov 2011 13:34:18 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112451/will-the-cost-of-this-el-power-maximum-167-kwh-for-6-months-come-in-addition-to-the-cost-for-fuel-10/ Is it correct that Your 1 MW E-Cat Container will require a maximum of 167 kW in el-power to run and generate the 1 MW of heath (a minimum 1 to 6 energy gain) (1 to 6 energy gain = 167 kW el-power in and 1 MW heat out)? http://faq.ecat.com/112450/is-it-correct-that-your-1-mw-e-cat-container-will-require-a-maximum-of-167-kw-in-el-power-to-run-and/ Tue, 15 Nov 2011 13:33:08 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112450/is-it-correct-that-your-1-mw-e-cat-container-will-require-a-maximum-of-167-kw-in-el-power-to-run-and/ How much nickel and hydrogen will it take to generate one megawatt of heat continuously for six months? http://faq.ecat.com/112449/how-much-nickel-and-hydrogen-will-it-take-to-generate-one-megawatt-of-heat-continuously-for-six-months/ Tue, 15 Nov 2011 13:30:24 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112449/how-much-nickel-and-hydrogen-will-it-take-to-generate-one-megawatt-of-heat-continuously-for-six-months/ Water temperature cannot be raised beyond the maximum temperature in each E-Cat, so does this mean that the water amount is bigger because it flows at an higher speed, exchanging less than maximum possible heat with each E-Cat? http://faq.ecat.com/112448/water-temperature-cannot-be-raised-beyond-the-maximum-temperature-in-each-e-cat-so-does-this-mean-that/ Tue, 15 Nov 2011 13:28:57 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112448/water-temperature-cannot-be-raised-beyond-the-maximum-temperature-in-each-e-cat-so-does-this-mean-that/ Are you planning to deliver a compact system (E-Cat Reactor + turbine + electric generator) , and this is not yet ready? http://faq.ecat.com/112447/are-you-planning-to-deliver-a-compact-system-e-cat-reactor-turbine-electric-generator-and-this/ Tue, 15 Nov 2011 13:26:45 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112447/are-you-planning-to-deliver-a-compact-system-e-cat-reactor-turbine-electric-generator-and-this/ E-Cat devices can not be used in conjunction with turbine and electric generator because of technical limitation of the E-Cat reactor? http://faq.ecat.com/112446/e-cat-devices-can-not-be-used-in-conjunction-with-turbine-and-electric-generator-because-of-technical/ Tue, 15 Nov 2011 13:25:09 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112446/e-cat-devices-can-not-be-used-in-conjunction-with-turbine-and-electric-generator-because-of-technical/ What was the maximum power produced by the E-CAT(s) when electrical power (for heating) was used? That is, 470 KW were produced in self sustainment mode. (The test was run at lower power for stability.) http://faq.ecat.com/112443/what-was-the-maximum-power-produced-by-the-e-cats-when-electrical-power-for-heating-was-used/ Tue, 15 Nov 2011 13:18:53 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112443/what-was-the-maximum-power-produced-by-the-e-cats-when-electrical-power-for-heating-was-used/ Was the 470 KW value for self-sustaining power produced by one half of the plant or by the entire plant – (both halves together)? http://faq.ecat.com/112442/was-the-470-kw-value-for-self-sustaining-power-produced-by-one-half-of-the-plant-or-by-the-entire-plant/ Tue, 15 Nov 2011 13:14:55 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112442/was-the-470-kw-value-for-self-sustaining-power-produced-by-one-half-of-the-plant-or-by-the-entire-plant/ There are reports that the external generator was left running during self-sustain mode. Could you please elaborate why this was the case? http://faq.ecat.com/112441/there-are-reports-that-the-external-generator-was-left-running-during-self-sustain-mode-could-you-please/ Tue, 15 Nov 2011 13:13:33 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112441/there-are-reports-that-the-external-generator-was-left-running-during-self-sustain-mode-could-you-please/ What was the maximum power produced by the E-CAT(s) when electrical power (for heating) was used? That is, 470 KW were produced in self sustainment mode. (The test was run at lower power for stability.) If the test(s) were run at full power, maintaining electrical heating for stability, what was – or would have been – the peak power? (I think output would have been closer to 1 MW.) http://faq.ecat.com/112440/what-was-the-maximum-power-produced-by-the-e-cats-when-electrical-power-for-heating-was-used-that/ Tue, 15 Nov 2011 13:11:57 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112440/what-was-the-maximum-power-produced-by-the-e-cats-when-electrical-power-for-heating-was-used-that/ Did anyone ever build and use an accurate thermo-mechanical computerised (or mathematical) model of an e-Cat? http://faq.ecat.com/112439/did-anyone-ever-build-and-use-an-accurate-thermo-mechanical-computerised-or-mathematical-model-of-an/ Tue, 15 Nov 2011 13:09:28 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112439/did-anyone-ever-build-and-use-an-accurate-thermo-mechanical-computerised-or-mathematical-model-of-an/ What is the E-CAT de-rating factor over time (ie: What % of the rated power is being Outputted after 2, 4 & 6 months)? http://faq.ecat.com/112437/what-is-the-e-cat-de-rating-factor-over-time-ie-what-of-the-rated-power-is-being-outputted-after/ Tue, 15 Nov 2011 12:56:12 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112437/what-is-the-e-cat-de-rating-factor-over-time-ie-what-of-the-rated-power-is-being-outputted-after/ What was the capacity of the portable generator used in your customer test ? This answer may squash some of the sceptic's arguments. (assuming that it is less than 0.5 MW) http://faq.ecat.com/112434/what-was-the-capacity-of-the-portable-generator-used-in-your-customer-test/ Tue, 15 Nov 2011 12:53:57 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112434/what-was-the-capacity-of-the-portable-generator-used-in-your-customer-test/ What city will you be working (hiring) in the US? http://faq.ecat.com/112433/what-city-will-you-be-working-hiring-in-the-us/ Tue, 15 Nov 2011 12:50:44 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112433/what-city-will-you-be-working-hiring-in-the-us/ Will the buyer of the next 1MW container be the same customer or a different customer? http://faq.ecat.com/112432/will-the-buyer-of-the-next-1mw-container-be-the-same-customer-or-a-different-customer/ Tue, 15 Nov 2011 12:38:57 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112432/will-the-buyer-of-the-next-1mw-container-be-the-same-customer-or-a-different-customer/ Any improvements you want in version 2? http://faq.ecat.com/112431/any-improvements-you-want-in-version-2/ Tue, 15 Nov 2011 12:36:28 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112431/any-improvements-you-want-in-version-2/ Have you started building another 1MW in another container? http://faq.ecat.com/112430/have-you-started-building-another-1mw-in-another-container/ Tue, 15 Nov 2011 12:34:56 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112430/have-you-started-building-another-1mw-in-another-container/ Are you planning to go public after the first year of sales? http://faq.ecat.com/112412/are-you-planning-to-go-public-after-the-first-year-of-sales/ Mon, 14 Nov 2011 21:10:38 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112412/are-you-planning-to-go-public-after-the-first-year-of-sales/ How mobile are the e-cats? Will it be easy to replacing generators on wheel? http://faq.ecat.com/112411/how-mobile-are-the-e-cats/ Mon, 14 Nov 2011 21:07:08 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112411/how-mobile-are-the-e-cats/ Do you think your technology will be made available to all of us? Can you already imagine scenarios for the marketing of the product? http://faq.ecat.com/112410/do-you-think-your-technology-will-be-made-available-to-all-of-us/ Mon, 14 Nov 2011 20:59:38 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112410/do-you-think-your-technology-will-be-made-available-to-all-of-us/ I was wondering if your invention is safe no matter what, what would happen if something should happen? http://faq.ecat.com/112409/i-was-wondering-if-your-invention-is-safe-no-matter-what-what-would-happen-if-something-should-happen/ Mon, 14 Nov 2011 20:49:17 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112409/i-was-wondering-if-your-invention-is-safe-no-matter-what-what-would-happen-if-something-should-happen/ How will one be "recharging" the nickel every 6 months? Will they have to buy it from the company? Will any finely powdered nickel do? And where will one get the hydrogen from? http://faq.ecat.com/112408/how-will-one-be-recharging-the-nickel-every-6-months-will-they-have-to-buy-it-from-the-company-will/ Mon, 14 Nov 2011 20:47:04 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112408/how-will-one-be-recharging-the-nickel-every-6-months-will-they-have-to-buy-it-from-the-company-will/ Which company will be producing E-cats? Ampenergo? And will they be available in Europe? http://faq.ecat.com/112407/which-company-will-be-producing-e-cats-ampenergo/ Mon, 14 Nov 2011 20:45:47 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112407/which-company-will-be-producing-e-cats-ampenergo/ When will the first e-cats be available for home-purchase? http://faq.ecat.com/112406/when-will-the-first-e-cats-be-available-for-home-purchase/ Mon, 14 Nov 2011 20:44:39 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112406/when-will-the-first-e-cats-be-available-for-home-purchase/ Finally, the 1MW plants that you are producing. Are they designed to operate at 1MW capacity in self sustain mode or only in "assisted mode"? http://faq.ecat.com/112405/finally-the-1mw-plants-that-you-are-producing-are-they-designed-to-operate-at-1mw-capacity-in-self/ Mon, 14 Nov 2011 20:43:24 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112405/finally-the-1mw-plants-that-you-are-producing-are-they-designed-to-operate-at-1mw-capacity-in-self/ Do you have any serious interest from any European or Asian customers wanting to buy your plants or only from the US so far? http://faq.ecat.com/112404/do-you-have-any-serious-interest-from-any-european-or-asian-customers-wanting-to-buy-your-plants-or-only/ Mon, 14 Nov 2011 20:42:30 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112404/do-you-have-any-serious-interest-from-any-european-or-asian-customers-wanting-to-buy-your-plants-or-only/ How will the refueling of the reactors be taken care of? If you have customers spread globally how are they going to renew the charge after 6 months? Will they be required to replace all the reactors with new charged reactors? If so this will be a quite a significant cost I assume especially if they need to be shipped overseas. http://faq.ecat.com/112403/how-will-the-refueling-of-the-reactors-be-taken-care-of-if-you-have-customers-spread-globally-how-are/ Mon, 14 Nov 2011 20:41:01 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112403/how-will-the-refueling-of-the-reactors-be-taken-care-of-if-you-have-customers-spread-globally-how-are/ What if something malfunctions? Do you have people on standby to go fix / sort out any problems? http://faq.ecat.com/112402/what-if-something-malfunctions/ Mon, 14 Nov 2011 20:37:55 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112402/what-if-something-malfunctions/ What sort of support or back up are you providing to customers of the plants? Do the new operators undergo some sort of stringent training or certification to operate the plant? http://faq.ecat.com/112401/what-sort-of-support-or-back-up-are-you-providing-to-customers-of-the-plants/ Mon, 14 Nov 2011 20:37:12 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112401/what-sort-of-support-or-back-up-are-you-providing-to-customers-of-the-plants/ At the Ny Teknik web site Mats Lewan has published a short video shot during self sustained mode. Between the steam pipe and bottle there is a valve, and the position of the valve handle clearly indicates that the valve is closed. Can you explain this mystery please? http://faq.ecat.com/112396/at-the-ny-teknik-web-site-mats-lewan-has-published-a-short-video-shot-during-self-sustained-mode-between/ Mon, 14 Nov 2011 20:09:20 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112396/at-the-ny-teknik-web-site-mats-lewan-has-published-a-short-video-shot-during-self-sustained-mode-between/ In the report of the implementation of the exothermal reactions of nickel 62 refers to the statement in WO/2009/125444: Internazionale PCT patent application. What can you say about this? http://faq.ecat.com/112394/in-the-report-of-the-implementation-of-the-exothermal-reactions-of-nickel-62-refers-to-the-statement/ Mon, 14 Nov 2011 19:48:45 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112394/in-the-report-of-the-implementation-of-the-exothermal-reactions-of-nickel-62-refers-to-the-statement/ The total hydrogen amount loaded into the plant seem to be 1,7 grams, at 55 atm. In the previous test (6 October) and others, with 1 e-cat, the Hydrogen amount was about 1,5 grams, still at 55 atm. I cannot understand how is it possible that 1 e-cat "eats" the same amount of hydrogen of more than 300 e-cats that constitute the 1MW plant. http://faq.ecat.com/112391/the-total-hydrogen-amount-loaded-into-the-plant-seem-to-be-17-grams-at-55-atm-in-the-previous-test/ Mon, 14 Nov 2011 18:40:32 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112391/the-total-hydrogen-amount-loaded-into-the-plant-seem-to-be-17-grams-at-55-atm-in-the-previous-test/ The framework that controls the resistance is simply 0 when the e-cat is self sustaining. I would like to know if the electrical outlet can be removed physically self-sustaining or not. I have a feeling that the ECAT needs a "minimum" of electricity at a given frequency to keep open the "gates" of nuclear fusion? http://faq.ecat.com/112390/the-framework-that-controls-the-resistance-is-simply-0-when-the-e-cat-is-self-sustaining-i-would-like/ Mon, 14 Nov 2011 18:36:51 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112390/the-framework-that-controls-the-resistance-is-simply-0-when-the-e-cat-is-self-sustaining-i-would-like/ Have you had the opportunity to obtain any infrared thermal images of the ecats in operation? As I'm sure you know, this type of imaging may assist in your development and troubleshooting, while providing strong visual evidence to the masses. http://faq.ecat.com/112388/have-you-had-the-opportunity-to-obtain-any-infrared-thermal-images-of-the-ecats-in-operation/ Mon, 14 Nov 2011 18:30:53 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112388/have-you-had-the-opportunity-to-obtain-any-infrared-thermal-images-of-the-ecats-in-operation/ Could it be made possible to pay just the energy + renting or leasing fees? I think this could be a preferable option for many customers, because this new technology must be expected to evolve and improve fast. http://faq.ecat.com/112387/could-it-be-made-possible-to-pay-just-the-energy-renting-or-leasing-fees/ Mon, 14 Nov 2011 18:29:00 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112387/could-it-be-made-possible-to-pay-just-the-energy-renting-or-leasing-fees/ Will there be renting or leasing plans? http://faq.ecat.com/112386/will-there-be-renting-or-leasing-plans/ Mon, 14 Nov 2011 18:28:09 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112386/will-there-be-renting-or-leasing-plans/ Will there be 100 kW or 50 kW models, as needed to heat medium sized or smaller industrial buildings? http://faq.ecat.com/112385/will-there-be-100-kw-or-50-kw-models-as-needed-to-heat-medium-sized-or-smaller-industrial-buildings/ Mon, 14 Nov 2011 18:27:02 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112385/will-there-be-100-kw-or-50-kw-models-as-needed-to-heat-medium-sized-or-smaller-industrial-buildings/ My only question is when will this be readily available and what kind of training would one need to install such a system? http://faq.ecat.com/112355/my-only-question-is-when-will-this-be-readily-available-and-what-kind-of-training-would-one-need-to-install/ Sun, 13 Nov 2011 23:51:51 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112355/my-only-question-is-when-will-this-be-readily-available-and-what-kind-of-training-would-one-need-to-install/ In the light of recent experiments and, I hope good, financial resources, will occur when small E-Cat? http://faq.ecat.com/112354/in-the-light-of-recent-experiments-and-i-hope-good-financial-resources-will-occur-when-small-e-cat/ Sun, 13 Nov 2011 23:50:05 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112354/in-the-light-of-recent-experiments-and-i-hope-good-financial-resources-will-occur-when-small-e-cat/ Snakes accusing you of fraud are everywhere. What is your opinion of them? http://faq.ecat.com/112353/snakes-accusing-you-of-fraud-are-everywhere-what-is-your-opinion-of-them/ Sun, 13 Nov 2011 23:48:19 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112353/snakes-accusing-you-of-fraud-are-everywhere-what-is-your-opinion-of-them/ Is the customer that bought this unit a industrial customer that is going to produce other units, or is it a final customer that will use that unit for its own needs? http://faq.ecat.com/112352/is-the-customer-that-bought-this-unit-a-industrial-customer-that-is-going-to-produce-other-units-or/ Sun, 13 Nov 2011 23:45:16 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112352/is-the-customer-that-bought-this-unit-a-industrial-customer-that-is-going-to-produce-other-units-or/ At that moment will it be possible to know who's the customer? And when will it be possible to know it? http://faq.ecat.com/112351/at-that-moment-will-it-be-possible-to-know-whos-the-customer/ Sun, 13 Nov 2011 23:44:18 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112351/at-that-moment-will-it-be-possible-to-know-whos-the-customer/ Will the unit that has been sold be immediately put in production? http://faq.ecat.com/112350/will-the-unit-that-has-been-sold-be-immediately-put-in-production/ Sun, 13 Nov 2011 23:43:22 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112350/will-the-unit-that-has-been-sold-be-immediately-put-in-production/ I suppose in the future it will be possible to build larger units and then with increased power unit? http://faq.ecat.com/112349/i-suppose-in-the-future-it-will-be-possible-to-build-larger-units-and-then-with-increased-power-unit/ Sun, 13 Nov 2011 23:41:40 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112349/i-suppose-in-the-future-it-will-be-possible-to-build-larger-units-and-then-with-increased-power-unit/ I have heard some people are trying to replicate your effect with home built devices. What do you think of that? http://faq.ecat.com/112348/i-have-heard-some-people-are-trying-to-replicate-your-effect-with-home-built-devices-what-do-you-think/ Sun, 13 Nov 2011 23:29:59 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112348/i-have-heard-some-people-are-trying-to-replicate-your-effect-with-home-built-devices-what-do-you-think/ In order to have an electric power of, let's say, 6 kW, which could be the power needed by the e-cat? A rough estimate. http://faq.ecat.com/112347/in-order-to-have-an-electric-power-of-lets-say-6-kw-which-could-be-the-power-needed-by-the-e-cat/ Sun, 13 Nov 2011 23:27:15 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112347/in-order-to-have-an-electric-power-of-lets-say-6-kw-which-could-be-the-power-needed-by-the-e-cat/ With regard to sales, I am curious as to why you are not licensing the technology and allowing others to develop the applications, including control systems for the E-cat? http://faq.ecat.com/112345/with-regard-to-sales-i-am-curious-as-to-why-you-are-not-licensing-the-technology-and-allowing-others/ Sun, 13 Nov 2011 23:24:04 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112345/with-regard-to-sales-i-am-curious-as-to-why-you-are-not-licensing-the-technology-and-allowing-others/ I often wonder if the E-cat might have a direct application to sea water desalination through distillation. Do you see such as a possibility in the medium term? http://faq.ecat.com/112344/i-often-wonder-if-the-e-cat-might-have-a-direct-application-to-sea-water-desalination-through-distillation/ Sun, 13 Nov 2011 23:21:34 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112344/i-often-wonder-if-the-e-cat-might-have-a-direct-application-to-sea-water-desalination-through-distillation/ Did I correctly understand that Ni used in the e-cat is in the form of nano-particles? If yes, what will the cost be of this form of Ni higher than Ni in the form of a solid rod? http://faq.ecat.com/112343/did-i-correctly-understand-that-ni-used-in-the-e-cat-is-in-the-form-of-nano-particles/ Sun, 13 Nov 2011 23:19:57 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112343/did-i-correctly-understand-that-ni-used-in-the-e-cat-is-in-the-form-of-nano-particles/ What do you see as R&D milestones that need to be met in order for this technology to be of maximum use? http://faq.ecat.com/112342/what-do-you-see-as-rd-milestones-that-need-to-be-met-in-order-for-this-technology-to-be-of-maximum-use/ Sun, 13 Nov 2011 23:06:51 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112342/what-do-you-see-as-rd-milestones-that-need-to-be-met-in-order-for-this-technology-to-be-of-maximum-use/ Will the funds come only from sales or do you have investment partners? http://faq.ecat.com/112341/will-the-funds-come-only-from-sales-or-do-you-have-investment-partners/ Sun, 13 Nov 2011 23:06:12 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112341/will-the-funds-come-only-from-sales-or-do-you-have-investment-partners/ How much do you project to spend on research and development in the next 5 years? http://faq.ecat.com/112340/how-much-do-you-project-to-spend-on-research-and-development-in-the-next-5-years/ Sun, 13 Nov 2011 23:05:45 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112340/how-much-do-you-project-to-spend-on-research-and-development-in-the-next-5-years/ How long does it take for delivery of 1 MW and the cost per kW module? http://faq.ecat.com/112339/how-long-does-it-take-for-delivery-of-1-mw-and-the-cost-per-kw-module/ Sun, 13 Nov 2011 23:03:53 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112339/how-long-does-it-take-for-delivery-of-1-mw-and-the-cost-per-kw-module/ Do the future e cat units that provide electricity will contain electrical outlet? http://faq.ecat.com/112338/do-the-future-e-cat-units-that-provide-electricity-will-contain-electrical-outlet/ Sun, 13 Nov 2011 23:01:39 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112338/do-the-future-e-cat-units-that-provide-electricity-will-contain-electrical-outlet/ Is the customer still satisfied? Do we have any information of this kind? http://faq.ecat.com/112337/is-the-customer-still-satisfied/ Sun, 13 Nov 2011 23:00:11 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112337/is-the-customer-still-satisfied/ What are your "next step" plans: Which achievements, which dates? http://faq.ecat.com/112336/what-are-your-next-step-plans-which-achievements-which-dates/ Sun, 13 Nov 2011 22:56:47 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112336/what-are-your-next-step-plans-which-achievements-which-dates/ What's the power density like? http://faq.ecat.com/112335/whats-the-power-density-like/ Sun, 13 Nov 2011 22:54:01 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112335/whats-the-power-density-like/ You said that the reactor from 1 MW worked in self sustain at reduced power from 1MW to 450kW for security reasons. This would mean that in this mode, you create some danger for anyone who is close to the reactor? http://faq.ecat.com/112334/you-said-that-the-reactor-from-1-mw-worked-in-self-sustain-at-reduced-power-from-1mw-to-450kw-for-security/ Sun, 13 Nov 2011 22:52:27 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112334/you-said-that-the-reactor-from-1-mw-worked-in-self-sustain-at-reduced-power-from-1mw-to-450kw-for-security/ The COP is guaranteed to average a factor of 6 or more for 6 months. What would be the maximum average COP a customer could see over 6 months? Perhaps a COP of 7 or 8? http://faq.ecat.com/112333/the-cop-is-guaranteed-to-average-a-factor-of-6-or-more-for-6-months-what-would-be-the-maximum-average/ Sun, 13 Nov 2011 22:50:23 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112333/the-cop-is-guaranteed-to-average-a-factor-of-6-or-more-for-6-months-what-would-be-the-maximum-average/ Regarding the frequency generator, can you tell us the exact work frequency? http://faq.ecat.com/112332/regarding-the-frequency-generator-can-you-tell-us-the-exact-work-frequency/ Sun, 13 Nov 2011 22:49:00 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112332/regarding-the-frequency-generator-can-you-tell-us-the-exact-work-frequency/ You have sold a plant to a customer who wants to stay anonymous. You have written you have sold a second plant. Is this second customer also willing to stay anonymous? http://faq.ecat.com/112330/you-have-sold-a-plant-to-a-customer-who-wants-to-stay-anonymous-you-have-written-you-have-sold-a-second/ Sun, 13 Nov 2011 22:44:15 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112330/you-have-sold-a-plant-to-a-customer-who-wants-to-stay-anonymous-you-have-written-you-have-sold-a-second/ If you do not want to sell it, can you imagine your future in 5 years? Are you a manager of a large multinational company, and continue to improve care for the invention of the millennium, or will you retire to enjoy the fruits of what this invention will bring you? http://faq.ecat.com/112329/if-you-do-not-want-to-sell-it-can-you-imagine-your-future-in-5-years/ Sun, 13 Nov 2011 22:41:48 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112329/if-you-do-not-want-to-sell-it-can-you-imagine-your-future-in-5-years/ If hypothetically, within a short time you would be granted a European patent and the U.S., how would you rate the commercial value of the same? http://faq.ecat.com/112328/if-hypothetically-within-a-short-time-you-would-be-granted-a-european-patent-and-the-us-how-would/ Sun, 13 Nov 2011 22:37:56 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112328/if-hypothetically-within-a-short-time-you-would-be-granted-a-european-patent-and-the-us-how-would/ Have you thought to a safer method to store hydrogen rather than liquid and compressed? It could also make certifications for a home usage of the e-cat more easy. For instance, I have heard about a safe method that uses "metallidruri", metallic sponge that stores and delivers Hi. http://faq.ecat.com/112325/have-you-thought-to-a-safer-method-to-store-hydrogen-rather-than-liquid-and-compressed/ Sun, 13 Nov 2011 22:32:14 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112325/have-you-thought-to-a-safer-method-to-store-hydrogen-rather-than-liquid-and-compressed/ Will it be possible for technical schools and universities to buy small eCat for training purpose? http://faq.ecat.com/112324/will-it-be-possible-for-technical-schools-and-universities-to-buy-small-ecat-for-training-purpose/ Sun, 13 Nov 2011 22:28:40 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112324/will-it-be-possible-for-technical-schools-and-universities-to-buy-small-ecat-for-training-purpose/ Will you do more public tests of the E-cat? http://faq.ecat.com/112323/will-you-do-more-public-tests-of-the-e-cat/ Sun, 13 Nov 2011 22:26:12 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112323/will-you-do-more-public-tests-of-the-e-cat/ Is there still engineering space to increase the operating temperature of the E-cat, so that it generates steam at higher temperature and higher pressure, which makes it easier to generate electricity afterwards? http://faq.ecat.com/112322/is-there-still-engineering-space-to-increase-the-operating-temperature-of-the-e-cat-so-that-it-generates/ Sun, 13 Nov 2011 22:24:02 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112322/is-there-still-engineering-space-to-increase-the-operating-temperature-of-the-e-cat-so-that-it-generates/ I was wondering if with the E-Cat household type, will be possible to modulate the power function of the temperature of the water contained in any tank, so simulating the classical thermostat, without the need to restart each time the reaction has to be increased the temperature? http://faq.ecat.com/112321/i-was-wondering-if-with-the-e-cat-household-type-will-be-possible-to-modulate-the-power-function-of/ Sun, 13 Nov 2011 22:21:03 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112321/i-was-wondering-if-with-the-e-cat-household-type-will-be-possible-to-modulate-the-power-function-of/ Upcoming Events Question: October 6th was a big day. October 28th was a really big day. What other big days are coming up that are important to you? http://faq.ecat.com/112320/upcoming-events-question-october-6th-was-a-big-day-october-28th-was-a-really-big-day-what-other-big/ Sun, 13 Nov 2011 22:19:12 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112320/upcoming-events-question-october-6th-was-a-big-day-october-28th-was-a-really-big-day-what-other-big/ Do you "build to order" or "build to forecast" for the 1MW plants? http://faq.ecat.com/112319/do-you-build-to-order-or-build-to-forecast-for-the-1mw-plants/ Sun, 13 Nov 2011 22:17:01 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112319/do-you-build-to-order-or-build-to-forecast-for-the-1mw-plants/ Can you sell individual eCats for small commercial installations, like hospitals, restaurants, hotels and clubs that have sauna? http://faq.ecat.com/112318/can-you-sell-individual-ecats-for-small-commercial-installations-like-hospitals-restaurants-hotels/ Sun, 13 Nov 2011 22:15:48 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112318/can-you-sell-individual-ecats-for-small-commercial-installations-like-hospitals-restaurants-hotels/ Many web magazines said that today the Journal of nuclear physics was offline. Can you tell us if there was technical problems, hack attacks or what's happened? http://faq.ecat.com/112317/many-web-magazines-said-that-today-the-journal-of-nuclear-physics-was-offline-can-you-tell-us-if-there/ Sun, 13 Nov 2011 22:11:59 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112317/many-web-magazines-said-that-today-the-journal-of-nuclear-physics-was-offline-can-you-tell-us-if-there/ Have you considered South Africa at all? Every year our electricity goes up 25-30% because of no infrastructure planning. http://faq.ecat.com/112316/have-you-considered-south-africa-at-all/ Sun, 13 Nov 2011 22:08:37 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112316/have-you-considered-south-africa-at-all/ You say 3 months before finished, but if you want to ramp up to 30-100 per year, how long to make you 3rd unit? http://faq.ecat.com/112315/you-say-3-months-before-finished-but-if-you-want-to-ramp-up-to-30-100-per-year-how-long-to-make-you/ Sun, 13 Nov 2011 22:07:00 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112315/you-say-3-months-before-finished-but-if-you-want-to-ramp-up-to-30-100-per-year-how-long-to-make-you/ How far are you in making your 2nd 1MW unit for your customer? http://faq.ecat.com/112314/how-far-are-you-in-making-your-2nd-1mw-unit-for-your-customer/ Sun, 13 Nov 2011 22:06:12 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112314/how-far-are-you-in-making-your-2nd-1mw-unit-for-your-customer/ Are you positive your heat exchanger isn't employing vacuum compression evaporation techniques, specifically steam injection? http://faq.ecat.com/112313/are-you-positive-your-heat-exchanger-isnt-employing-vacuum-compression-evaporation-techniques-specifically/ Sun, 13 Nov 2011 22:04:39 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112313/are-you-positive-your-heat-exchanger-isnt-employing-vacuum-compression-evaporation-techniques-specifically/ Why was it not possible to commission the control system to an Italian firm? http://faq.ecat.com/112312/why-was-it-not-possible-to-commission-the-control-system-to-an-italian-firm/ Sun, 13 Nov 2011 22:03:03 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112312/why-was-it-not-possible-to-commission-the-control-system-to-an-italian-firm/ Who is your first 1MW customer? http://faq.ecat.com/112311/who-is-your-first-1mw-customer/ Sun, 13 Nov 2011 22:01:00 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112311/who-is-your-first-1mw-customer/ How many power plants will you be able to build with the parts that are currently being produced by your suppliers? http://faq.ecat.com/112310/how-many-power-plants-will-you-be-able-to-build-with-the-parts-that-are-currently-being-produced-by-your/ Sun, 13 Nov 2011 21:57:59 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112310/how-many-power-plants-will-you-be-able-to-build-with-the-parts-that-are-currently-being-produced-by-your/ Isn't there a big danger, that single E-Cats of your sold 1MW-unit are reverse engineered? http://faq.ecat.com/112309/isnt-there-a-big-danger-that-single-e-cats-of-your-sold-1mw-unit-are-reverse-engineered/ Sun, 13 Nov 2011 21:55:16 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112309/isnt-there-a-big-danger-that-single-e-cats-of-your-sold-1mw-unit-are-reverse-engineered/ Have you evaluated the idea of ​​converting heat directly into electricity using solid state systems rather than adhere to the Carnot cycle? http://faq.ecat.com/112308/have-you-evaluated-the-idea-of-converting-heat-directly-into-electricity-using-solid-state-systems/ Sun, 13 Nov 2011 21:46:00 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112308/have-you-evaluated-the-idea-of-converting-heat-directly-into-electricity-using-solid-state-systems/ I still question why you would use such a loud generator to power pumps for 5hrs when it could be done silently by plugging into the building's electrical outlet? http://faq.ecat.com/112307/i-still-question-why-you-would-use-such-a-loud-generator-to-power-pumps-for-5hrs-when-it-could-be-done/ Sun, 13 Nov 2011 21:37:50 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112307/i-still-question-why-you-would-use-such-a-loud-generator-to-power-pumps-for-5hrs-when-it-could-be-done/ What do you think about using heavy gases instead of hydrogen? Probably, it may help to produce energy plus precious metals by transmutation. http://faq.ecat.com/112304/what-do-you-think-about-using-heavy-gases-instead-of-hydrogen/ Sun, 13 Nov 2011 21:17:10 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112304/what-do-you-think-about-using-heavy-gases-instead-of-hydrogen/ Do you plan to use turbines that could use low temperature and low pressure steam, or do you think you will have to increase the temperature and the pressure of steam on your future E-cats? http://faq.ecat.com/112303/do-you-plan-to-use-turbines-that-could-use-low-temperature-and-low-pressure-steam-or-do-you-think-you/ Sun, 13 Nov 2011 21:12:36 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112303/do-you-plan-to-use-turbines-that-could-use-low-temperature-and-low-pressure-steam-or-do-you-think-you/ Mr Rossi: Recently you were asked if the E-Cat could replace the coal fired turbines in coal power plants, your reply was "We are working on it, it will be possible, yes." Can you give us any kind of time frame for when this will be possible? Are you giving this development top priority? http://faq.ecat.com/112296/mr-rossi-recently-you-were-asked-if-the-e-cat-could-replace-the-coal-fired-turbines-in-coal-power-plants/ Sun, 13 Nov 2011 19:37:21 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112296/mr-rossi-recently-you-were-asked-if-the-e-cat-could-replace-the-coal-fired-turbines-in-coal-power-plants/ What is taken the patent so long? http://faq.ecat.com/112283/what-is-taken-the-patent-so-long/ Sun, 13 Nov 2011 17:25:25 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112283/what-is-taken-the-patent-so-long/ How can more power be produced? http://faq.ecat.com/112282/how-can-more-power-be-produced/ Sun, 13 Nov 2011 17:22:04 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112282/how-can-more-power-be-produced/ In your previous experiments, as reported in the Rossi-Focardi paper, the energy out/inp COP was averaging 200. This is an order of magnitude more than your later experiments where COP reached around 20 according your info. Could you clarify the reasons of this huge difference in COP? http://faq.ecat.com/112281/in-your-previous-experiments-as-reported-in-the-rossi-focardi-paper-the-energy-outinp-cop-was-averaging/ Sun, 13 Nov 2011 17:12:30 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112281/in-your-previous-experiments-as-reported-in-the-rossi-focardi-paper-the-energy-outinp-cop-was-averaging/ Mr. Rossi, what is your work approach? http://faq.ecat.com/112280/mr-rossi-what-is-your-work-approach/ Sun, 13 Nov 2011 17:09:21 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112280/mr-rossi-what-is-your-work-approach/ When your fusion engine is in mass production, what will be the cost of electricity of 1 kw/h in Euro-Cents? http://faq.ecat.com/112279/when-your-fusion-engine-is-in-mass-production-what-will-be-the-cost-of-electricity-of-1-kwh-in-euro-cents/ Sun, 13 Nov 2011 17:03:35 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112279/when-your-fusion-engine-is-in-mass-production-what-will-be-the-cost-of-electricity-of-1-kwh-in-euro-cents/ What is the longest period of time that the apparatus was in operation? http://faq.ecat.com/112278/what-is-the-longest-period-of-time-that-the-apparatus-was-in-operation/ Sun, 13 Nov 2011 17:02:03 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112278/what-is-the-longest-period-of-time-that-the-apparatus-was-in-operation/ What kind of radiation escape from the system? http://faq.ecat.com/112277/what-kind-of-radiation-escape-from-the-system/ Sun, 13 Nov 2011 17:00:43 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112277/what-kind-of-radiation-escape-from-the-system/ How much is the period for the maintenance? Is there a scheduled time when you need to stop the system to change some parts? http://faq.ecat.com/112276/how-much-is-the-period-for-the-maintenance/ Sun, 13 Nov 2011 16:58:18 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112276/how-much-is-the-period-for-the-maintenance/ We hear a pulsating sound in the video of the operating catalyzer. What is causing the sound? http://faq.ecat.com/112275/we-hear-a-pulsating-sound-in-the-video-of-the-operating-catalyzer-what-is-causing-the-sound/ Sun, 13 Nov 2011 16:55:22 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112275/we-hear-a-pulsating-sound-in-the-video-of-the-operating-catalyzer-what-is-causing-the-sound/ One picogram is 1/1000 of a billionth of a gram. Why do you refer to picograms as they are many orders of magnitude smaller than grams? http://faq.ecat.com/112274/one-picogram-is-11000-of-a-billionth-of-a-gram-why-do-you-refer-to-picograms-as-they-are-many-orders/ Sun, 13 Nov 2011 16:50:49 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112274/one-picogram-is-11000-of-a-billionth-of-a-gram-why-do-you-refer-to-picograms-as-they-are-many-orders/ How much Ni is in the cell? http://faq.ecat.com/112273/how-much-ni-is-in-the-cell/ Sun, 13 Nov 2011 16:48:18 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112273/how-much-ni-is-in-the-cell/ Can anyone try to build an e-cat? http://faq.ecat.com/112272/can-anyone-try-to-build-an-e-cat/ Sun, 13 Nov 2011 16:46:10 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112272/can-anyone-try-to-build-an-e-cat/ Is there evidence of consumption of a fuel? http://faq.ecat.com/112271/is-there-evidence-of-consumption-of-a-fuel/ Sun, 13 Nov 2011 16:44:21 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112271/is-there-evidence-of-consumption-of-a-fuel/ How is the power switched on and off? http://faq.ecat.com/112270/how-is-the-power-switched-on-and-off/ Sun, 13 Nov 2011 16:43:31 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112270/how-is-the-power-switched-on-and-off/ Is there any evidence for isotopic anomalies? http://faq.ecat.com/112269/is-there-any-evidence-for-isotopic-anomalies/ Sun, 13 Nov 2011 16:37:30 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112269/is-there-any-evidence-for-isotopic-anomalies/ What is the evidence of copper production? http://faq.ecat.com/112268/what-is-the-evidence-of-copper-production/ Sun, 13 Nov 2011 16:35:45 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112268/what-is-the-evidence-of-copper-production/ Who invented the E-Cat? http://faq.ecat.com/112266/who-invented-the-e-cat/ Sun, 13 Nov 2011 15:53:38 +0000 Asked by Ecat.com 7 months ago http://faq.ecat.com/112266/who-invented-the-e-cat/